参数资料
型号: SC101161DGMPVR2
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
封装: LQFP-112
文件页数: 141/142页
文件大小: 6464K
代理商: SC101161DGMPVR2
Device User Guide — 9S12DT128DGV2/D V02.15
98
Freescale Semiconductor
NOTE:
In the following context VDD5 is used for either VDDA, VDDR and VDDX; VSS5
is used for either VSSA, VSSR and VSSX unless otherwise noted.
IDD5 denotes the sum of the currents flowing into the VDDA, VDDX and VDDR
pins.
VDD is used for VDD1, VDD2 and VDDPLL, VSS is used for VSS1, VSS2 and
VSSPLL.
IDD is used for the sum of the currents flowing into VDD1 and VDD2.
A.1.3 Pins
There are four groups of functional pins.
A.1.3.1 5V I/O pins
Those I/O pins have a nominal level of 5V. This class of pins is comprised of all port I/O pins, the analog
inputs, BKGD pin and the RESET inputs.The internal structure of all those pins is identical, however some
of the functionality may be disabled. E.g. for the analog inputs the output drivers, pull-up and pull-down
resistors are disabled permanently.
A.1.3.2 Analog Reference
This class is made up by the two VRH and VRL pins.
A.1.3.3 Oscillator
The pins XFC, EXTAL, XTAL dedicated to the oscillator have a nominal 2.5V level. They are supplied
by VDDPLL.
A.1.3.4 TEST
This pin is used for production testing only.
A.1.3.5 VREGEN
This pin is used to enable the on chip voltage regulator.
A.1.4 Current Injection
Power supply must maintain regulation within operating VDD5 or VDD range during instantaneous and
operating maximum current conditions. If positive injection current (Vin > VDD5) is greater than IDD5, the
injection current may flow out of VDD5 and could result in external power supply going out of regulation.
Insure external VDD5 load will shunt current greater than maximum injection current. This will be the
greatest risk when the MCU is not consuming power; e.g. if no system clock is present, or if clock rate is
very low which would reduce overall power consumption.
相关PDF资料
PDF描述
SPAKMC332VFV16 32-BIT, 16 MHz, MICROCONTROLLER, PQFP144
SPAKMC332MFV20 32-BIT, 20 MHz, MICROCONTROLLER, PQFP144
SPAKMC332MFC20 32-BIT, 20 MHz, MICROCONTROLLER, PQFP132
SPAKMC332GMFV20 32-BIT, 20 MHz, MICROCONTROLLER, PQFP144
SPAKMC332GCFV20 32-BIT, 20 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
SC101161DJ 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:nullDevice User Guide
SC101161DT 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:nullDevice User Guide
SC10-11CGKWA 制造商:KINGBRIGHT COMPANY LLC 功能描述:DISPLAY 570NM GRN 1DIG 1 TH 制造商:Kingbright Corporation 功能描述:DISPLAY 570NM GRN 1DIG 1 TH 制造商:Kingbright Corporation 功能描述:LED Displays & Accessories 1" SINGLE DIGIT GRN LED DISPLAY
SC10-11EWA 功能描述:LED 显示器和配件 Single Red 625nm Common Cathode RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube
SC10-11GWA 功能描述:LED 显示器和配件 Single Green 568nm Common Cathode RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube