参数资料
型号: SC16C554IB64,128
厂商: NXP Semiconductors
文件页数: 26/55页
文件大小: 0K
描述: IC UART QUAD SOT314-2
标准包装: 1,500
通道数: 4,QUART
FIFO's: 16 字节
电源电压: 2.5V,3.3V,5V
带自动流量控制功能:
带IrDA 编码器/解码器:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 64-LQFP
供应商设备封装: 64-LQFP(10x10)
包装: 带卷 (TR)
其它名称: 935270074128
SC16C554IB64-T
SC16C554IB64-T-ND
Philips Semiconductors
SC16C554/554D
Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
Product data
Rev. 05 — 10 May 2004
32 of 55
9397 750 13132
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
7.8 Modem Status Register (MSR)
This register provides the current state of the control interface signals from the
modem, or other peripheral device to which the SC16C554/554D is connected.
Four bits of this register are used to indicate the changed information. These bits are
set to a logic 1 whenever a control input from the modem changes state. These bits
are set to a logic 0 whenever the CPU reads this register.
0
LSR[0]
Receive data ready.
Logic 0 = No data in receive holding register or FIFO (normal default
condition).
Logic 1 = Data has been received and is saved in the receive holding
register or FIFO.
Table 19:
Line Status Register bits description…continued
Bit
Symbol
Description
Table 20:
Modem Status Register bits description
Bit
Symbol
Description
7
MSR[7]
CD (Active-HIGH, logical 1). Normally this bit is the complement of the
CD input. In the loop-back mode this bit is equivalent to the OP2 bit in the
MCR register.
6
MSR[6]
RI (Active-HIGH, logical 1). Normally this bit is the complement of the RI
input. In the loop-back mode this bit is equivalent to the OP1 bit in the
MCR register.
5
MSR[5]
DSR (Active-HIGH, logical 1). Normally this bit is the complement of the
DSR input. In loop-back mode this bit is equivalent to the DTR bit in the
MCR register.
4
MSR[4]
CTS. CTS functions as hardware ow control signal input if it is enabled
via EFR[7]. The transmit holding register ow control is enabled/disabled
by MSR[4]. Flow control (when enabled) allows starting and stopping the
transmissions based on the external modem CTS signal. A logic 1 at the
CTS pin will stop SC16C554/554D transmissions as soon as current
character has nished transmission. Normally MSR[4] is the complement
of the CTS input. However, in the loop-back mode, this bit is equivalent to
the RTS bit in the MCR register.
3
MSR[3]
CD [1]
Logic 0 = No CD change (normal default condition).
Logic1=The CD input to the SC16C554/554D has changed state
since the last time it was read. A modem Status Interrupt will be
generated.
2
MSR[2]
RI [1]
Logic 0 = No RI change (normal default condition).
Logic1=The RI input to the SC16C554/554D has changed from a
logic 0 to a logic 1. A modem Status Interrupt will be generated.
相关PDF资料
PDF描述
SC16C554IB64,151 IC UART QUAD SOT314-2
AT89C51RB2-RLRUL IC 8051 MCU 16K FLASH 44-VQFP
VI-B7N-IW-F2 CONVERTER MOD DC/DC 18.5V 100W
VI-B7N-IW-F1 CONVERTER MOD DC/DC 18.5V 100W
VI-B7M-IX-F4 CONVERTER MOD DC/DC 10V 75W
相关代理商/技术参数
参数描述
SC16C554IB80 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554IB80,528 功能描述:UART 接口集成电路 Quad UART RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C554IB80,551 功能描述:UART 接口集成电路 16C 2.5V-5V 4CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C554IB80,557 功能描述:UART 接口集成电路 16C 2.5V-5V 4CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C650A 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal Asynchronous Receiver/Transmitter (UART) with 32-byte FIFO and infrared (IrDA) encoder/decoder