参数资料
型号: SP6656EB
厂商: Exar Corporation
文件页数: 9/16页
文件大小: 0K
描述: EVAL BOARD FOR SP6656
标准包装: 1
系列: *
THEORY OF OPERATION
timer. The minimum on-timer times out and
indicates DRVON can be reset if the voltage
loop is satisfied. If V OUT is still below the
that are greater than half the minimum cur-
rent ripple. The current ripple, I LR , is defined
by the equation:
regulation point RESET is held low until
V OUT is above regulation. Once RESET
occurs T ON minimum is reset, and the T OFF
I LR ≈
K ON
L
*
V IN - V OUT - I OUT * R CH
V IN - V OUT
one-shot is triggered to blank the loop com-
parator from starting a new charge cycle for
a minimum period. This blanking period
occurs during the noisy LX transition to
discharge, where spurious comparator
states may occur. For T OFF > T BLANK the
loop is in a discharge or wait state until the
loop comparator starts the next charge cycle
by DRVON going high.
If an over current occurs during charge the
loop is interrupted and DRVON is RESET.
The off-time one-shot pulse width is wid-
ened to T OFF = K OFF / V OUT , which holds the
loop in discharge for that time. At the end of
the off-time the loop is released and con-
trolled by VOLOW. In this manner maxi-
mum inductor current is controlled on a
cycle-by-cycle basis. An assertion of UVLO
where:
L = Inductor value
I OUT = Load current
R CH = PMOS on resistance, 0.3 ? typ.
If the I OUT * R CH term is negligible compared
with (V IN - V OUT ), the above equation simpli-
fies to:
K ON
I LR ≈
L
For most applications, the inductor current
ripple controlled by the SP6656 is constant
regardless of input and output voltage.
The maximum loop frequency in CCM is
defined by the equation:
(undervoltage lockout) or TSD (thermal shut-
down) holds the loop in no-charge until the
fault has ended.
F LP ≈
where:
(V IN - V OUT ) * (V OUT + I OUT * R DC )
K ON * [V IN + I OUT * (R DC - R CH )]
F LP = CCM loop frequency
On-Time Control - Discharge Phase
The discharge phase follows with the high
side PMOS switch opening and the low side
R DC = NMOS on resistance, 0.3 ? typ.
Ignoring conduction losses simplifies the
loop frequency to:
NMOS switch closing to provide a discharge
path for the inductor current. The decreas-
ing inductor current and the load current
F LP ≈
1
K ON
*
V OUT
V IN
* (V IN - V OUT )
cause the output voltage to drop. Under
normal load conditions when the inductor
current is below the programmed limit, the
off-time will continue until the output voltage
falls below the regulation threshold, which
initiates a new charge cycle via the loop
comparator.
The inductor current “floats” in continuous
conduction mode. During this mode the
inductor peak current is below the pro-
grammed limit and the valley current is
above zero. This is to satisfy load currents
AND’ing the loop comparator and the on-
timer reduces the switching frequency for
load currents below half the inductor ripple
current. This increases light load efficiency.
The minimum on-time insures that the in-
ductor current ripple is a minimum of K ON /L,
more than the load current demands. The
converter goes in to a standard pulse fre-
quency modulation (PFM) mode where the
switching frequency is proportional to the
load current.
Date: 3/6/06
SP6656, 400mA Synchronous Buck Regulator with Dynamically Adjustable Voltage Output
9
? Copyright 2006 Sipex Corporation
相关PDF资料
PDF描述
GCM06DTKI CONN EDGECARD 12POS DIP .156 SLD
M7TTK-5010J IDC CABLE - MDL50K/MC50G/MDL50K
GEM08DTBI CONN EDGECARD 16POS R/A .156 SLD
A9BAA-1002F FLEX CABLE - AFF10A/AF10/AFE10T
EBC25DRTI CONN EDGECARD 50POS DIP .100 SLD
相关代理商/技术参数
参数描述
SP6656ER 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High Efficiency 400mA Synchronous Buck Regulator with Bit Programmable Output
SP6656ER/TR 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High Efficiency 400mA Synchronous Buck Regulator with Bit Programmable Output
SP6656ER3 制造商:SIPEX 制造商全称:Sipex Corporation 功能描述:High Efficiency 400mA Synchronous Buck Regulator with Dynamically Adjustable Voltage Output
SP6656ER3-L 功能描述:DC/DC 开关控制器 High Eff. 400mA Sync. Buck Reg RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
SP6656ER3-L/TR 功能描述:DC/DC 开关控制器 High Eff 400mA Synchronous RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK