- 您现在的位置：买卖IC网 > PDF目录10398 > SSM2166SZ-REEL (Analog Devices Inc)IC PREAMP AUDIO MONO MIC 14SOIC PDF资料下载
参数资料
| 型号： | SSM2166SZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC PREAMP AUDIO MONO MIC 14SOIC |
| 产品变化通告： | Material Change 25/Mar/2009 |
| 标准包装： | 1 |
| 类型： | AB 类 |
| 输出类型： | 1-通道（单声道） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 特点： | 麦克风 |
| 安装类型： | 表面贴装 |
| 供应商设备封装： | 14-SOICN |
| 封装/外壳： | 14-SOIC（0.154"，3.90mm 宽） |
| 包装： | 标准包装 |
| 产品目录页面： | 775 (CN2011-ZH PDF) |
| 其它名称： | SSM2166SZ-REELDKR |
SSM2166
Data Sheet
Rev. E | Page 16 of 20
SETUP SUMMARY
The transfer condition of Figure 2 has been implemented. For
inputs below the 100 μV noise gate threshold, circuit and back-
ground noise is minimized. Above it, the output increases at a
rate of 1 dB for each 2 dB input increase until the 500 mV rotation
point is reached at an input of approximately 15 mV. For higher
inputs that drive the output beyond 500 mV, limiting occurs
and there is little further increase. The SSM2166 processes the
output of the buffer, which in the previous example is 20 dB, or
10× the input level. Use the oscilloscope to ensure that the
buffer is not being driven into clipping with the highest expected
input peaks. Always take the minimum gain in the buffer consis-
tent with the average source level and crest factor (ratio of peak
to rms). The wide program range of the SSM2166 makes it
useful in many applications other than microphone signal
conditioning.
Table 6. Initial Potentiometer Settings
Function
Potentiometer
Range
Initial Position
Initial Resistance
Effect of Change
Gain Adjust (VCA)
R10
0 k to 20 k
CCW
0
0 dB; CW to increase VCA gain
Rotation Point
R3
0 k to 50 k
CCW
0
1 V; CW to reduce rotation point
Compression Point
R6
0 k to 100 k
CCW
0
1:1; CW to increase compression
Noise Gate
R7
0 k to 1 M
CW
1 M
300 V; CCW to increase threshold
Table 7. Demonstration Board Parts List
Component
Value
Description
R1
10 k resistor
Feedback
R2
10 k resistor
Input
R3
50 k potentiometer
Rotation point, adjust
R4
500 resistor
Rotation point, fixed
R5
0 resistor
Compression ratio, fixed
R6
100 k potentiometer
Compression ratio, adjust
R7
1 M potentiometer
Noise gate, adjust
R8
500 resistor
Noise gate, fixed
R9
1 k resistor
Gain adjust, fixed
R10
20 k potentiometer
Gain adjust
R11
330 resistor
Mute
R12
100 k resistor
Power-down, pull-up
C1
0.1 F capacitor
Input dc block
C2
1 F capacitor
Buffer low F, G = 1
C3
0.1 F capacitor
+V bypass
C4
2.2 F to 22 F capacitor
Average capacitor
C5
0.01 F capacitor
Mute click suppress
C6
10 F capacitor
Coupling
C7
10 F capacitor
VCA noise/dc balance
IC1
MIC preamp
IC2
OP113, IC
Operational amplifier, output buffer
S1
SPST, Switch
Mute
J1
1/8-inch mini phone plug jumper
MIC input
J2
RCA female jumper
Output jack
相关PDF资料 |
PDF描述 |
|---|---|
| VE-26Z-IU-F4 | CONVERTER MOD DC/DC 2V 80W |
| VE-J5P-MY-B1 | CONVERTER MOD DC/DC 13.8V 50W |
| VI-B1M-IV-F2 | CONVERTER MOD DC/DC 10V 150W |
| MS27473E14B18SLC | CONN HSG PLUG 18POS STRGHT SCKT |
| VE-J5M-MY-B1 | CONVERTER MOD DC/DC 10V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SSM2166SZ-REEL1 | 制造商:AD 制造商全称:Analog Devices 功能描述:Microphone Preamplifier with Variable Compression and Noise Gating |
| SSM2166SZ-REEL7 | 功能描述:IC PREAMP AUDIO MONO MIC 14SOIC RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:- 标准包装:80 系列:- 类型:AB 类 输出类型:1-通道（单声道） 在某负载时最大输出功率 x 通道数量:1.25W x 1 @ 8 欧姆 电源电压:2.5 V ~ 5.5 V 特点:消除爆音，差分输入，关闭，热保护 安装类型:表面贴装 供应商设备封装:8-MSOP-PowerPad 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:管件 配用:296-31419-ND - EVAL MODULE FOR TPA6205A1 其它名称:296-34563-5TPA6205A1DGN-ND |
| SSM2166SZ-REEL71 | 制造商:AD 制造商全称:Analog Devices 功能描述:Microphone Preamplifier with Variable Compression and Noise Gating |
| SSM2166SZ-X | 制造商:Analog Devices 功能描述:MICROPHONE PREAMPLIFIER W/VAR COMPRESS, ROHS - Rail/Tube |
| SSM2167 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Voltage Microphone Preamplifier with Variable Compression and Noise Gating |
发布紧急采购，3分钟左右您将得到回复。