参数资料
型号: STM32F103VDT7XXX
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 0.50 MM PITCH, ROHS COMPLIANT, LQFP-100
文件页数: 109/122页
文件大小: 1599K
代理商: STM32F103VDT7XXX
STM32F103xC, STM32F103xD, STM32F103xE
Electrical characteristics
Doc ID 14611 Rev 6
5.3.16
Communications interfaces
I
2C interface characteristics
Unless otherwise specified, the parameters given in Table 50 are derived from tests
performed under ambient temperature, fPCLK1 frequency and VDD supply voltage conditions
summarized in Table 10.
The STM32F103xC performance line I
2C interface meets the requirements of the standard
I
2C communication protocol with the following restrictions: the I/O pins SDA and SCL are
mapped to are not “true” open-drain. When configured as open-drain, the PMOS connected
between the I/O pin and VDD is disabled, but is still present.
The I
2C characteristics are described in Table 50. Refer also to Section 5.3.13: I/O port
characteristics for more details on the input/output alternate function characteristics (SDA
and SCL).
Table 50.
I2C characteristics
Symbol
Parameter
Standard mode I2C(1)
1.
Guaranteed by design, not tested in production.
Fast mode I2C(1)(2)
2.
fPCLK1 must be higher than 2 MHz to achieve the maximum standard mode I
2C frequency. It must be
higher than 4 MHz to achieve the maximum fast mode I2C frequency.
Unit
Min
Max
Min
Max
tw(SCLL)
SCL clock low time
4.7
1.3
s
tw(SCLH)
SCL clock high time
4.0
0.6
tsu(SDA)
SDA setup time
250
100
ns
th(SDA)
SDA data hold time
0(3)
3.
The maximum hold time of the Start condition has only to be met if the interface does not stretch the low
period of SCL signal.
0(4)
4.
The device must internally provide a hold time of at least 300ns for the SDA signal in order to bridge the
undefined region of the falling edge of SCL.
tr(SDA)
tr(SCL)
SDA and SCL rise time
1000
20 + 0.1Cb
300
tf(SDA)
tf(SCL)
SDA and SCL fall time
300
th(STA)
Start condition hold time
4.0
0.6
s
tsu(STA)
Repeated Start condition
setup time
4.7
0.6
tsu(STO)
Stop condition setup time
4.0
0.6
s
tw(STO:STA)
Stop to Start condition time
(bus free)
4.7
1.3
s
Cb
Capacitive load for each bus
line
400
pF
相关PDF资料
PDF描述
STM32F103ZDH7XXX 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA100
STM32F103RCY7TR 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA64
STM32F103ZGH7TR 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA144
STM32F103ZFT7XXX 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PQFP144
STM32F107VBH7XXX 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, BGA100
相关代理商/技术参数
参数描述
STM32F103VDY6TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VDY6XXX 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VDY7TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VDY7XXX 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VE 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces