参数资料
型号: STM32F103VEH6
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA100
封装: 10 X 10 MM, 0.50 MM PITCH, ROHS COMPLIANT, LFBGA-100
文件页数: 99/115页
文件大小: 1225K
代理商: STM32F103VEH6
Electrical characteristics
STM32F103xC, STM32F103xD, STM32F103xE
5.3.16
Communications interfaces
I
2C interface characteristics
Unless otherwise specified, the parameters given in Table 50 are derived from tests
performed under ambient temperature, fPCLK1 frequency and VDD supply voltage conditions
summarized in Table 10.
The STM32F103xC performance line I
2C interface meets the requirements of the standard
I
2C communication protocol with the following restrictions: the I/O pins SDA and SCL are
mapped to are not “true” open-drain. When configured as open-drain, the PMOS connected
between the I/O pin and VDD is disabled, but is still present.
The I
2C characteristics are described in Table 50. Refer also to Section 5.3.13: I/O port
characteristics for more details on the input/output alternate function characteristics (SDA
and SCL).
Table 50.
I2C characteristics
Symbol
Parameter
Standard mode I2C(1)
1.
Guaranteed by design, not tested in production.
Fast mode I2C(1)(2)
2.
fPCLK1 must be higher than 2 MHz to achieve the maximum standard mode I
2C frequency. It must be
higher than 4 MHz to achieve the maximum fast mode I2C frequency.
Unit
Min
Max
Min
Max
tw(SCLL)
SCL clock low time
4.7
1.3
s
tw(SCLH)
SCL clock high time
4.0
0.6
tsu(SDA)
SDA setup time
250
100
ns
th(SDA)
SDA data hold time
0(3)
3.
The maximum hold time of the Start condition has only to be met if the interface does not stretch the low
period of SCL signal.
0(4)
4.
The device must internally provide a hold time of at least 300ns for the SDA signal in order to bridge the
undefined region of the falling edge of SCL.
tr(SDA)
tr(SCL)
SDA and SCL rise time
1000
20 + 0.1Cb
300
tf(SDA)
tf(SCL)
SDA and SCL fall time
300
th(STA)
Start condition hold time
4.0
0.6
s
tsu(STA)
Repeated Start condition
setup time
4.7
0.6
tsu(STO)
Stop condition setup time
4.0
0.6
μs
tw(STO:STA)
Stop to Start condition time
(bus free)
4.7
1.3
μs
Cb
Capacitive load for each bus
line
400
pF
相关PDF资料
PDF描述
STM32F103RDH7TR 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA64
STM32F103RCH6TR 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PBGA64
STM32F103RCT7 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PQFP64
STM32F103T6U6AXX 32-BIT, FLASH, 72 MHz, RISC MICROCONTROLLER, PQCC36
STM32W108CBU62 SPECIALTY MICROPROCESSOR CIRCUIT, QCC48
相关代理商/技术参数
参数描述
STM32F103VEH6TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VEH6XXX 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VEH7 功能描述:ARM微控制器 - MCU 32BIT Cortex M3 H/D Perf Line USB CAN RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
STM32F103VEH7TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
STM32F103VEH7XXX 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces