参数资料
型号: STR912FW42X6
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 96 MHz, RISC MICROCONTROLLER, PQFP128
封装: 14 X 14 MM, PLASTIC, LQFP-128
文件页数: 24/73页
文件大小: 1538K
代理商: STR912FW42X6
Obsolete
Product(s)
- Obsolete
Product(s)
Functional overview
STR91xF
30/73
2.25.1 DMA
A programmable DMA channel may be assigned by CPU firmware to service each timer/
counter module TIM0 and TIM1 for fast and direct transfers.
2.26
Three-phase induction motor controller (IMC)
The STR91xF provides an integrated controller for variable speed motor control applications.
Six PWM outputs are generated on high current drive pins P6.0 to P6.5 for controlling a three-
phase AC induction motor drive circuit assembly. Rotor speed feedback is provided by
capturing a tachometer input signal on pin P6.6, and an asynchronous hardware emergency
stop input is available on pin P6.7 to stop the motor immediately if needed, independently of
firmware.
The IMC unit has the following features:
Three PWM outputs generated using a 10-bit PWM counter, one for each phase U, V, W.
Complimentary PWM outputs are also generated for each phase.
Choice of classic or zero-centered PWM generation modes
10-bit PWM counter clock is supplied through a programmable 8-bit prescaler of the APB
clock.
Programmable 6-bit dead-time generator to add delay to each of the three complimentary
PWM outputs
8-bit repetition counter
Automatic rotor speed measurement with 16-bit resolution. Schmitt trigger tachometer
input with programmable edge detection
Hardware asynchronous emergency stop input
A dedicated interrupt to CPU with eight flags
2.27
External memory interface (EMI)
STR91xF devices in 128-pin packages offer an external memory bus for connecting external
parallel peripherals and memories. The EMI bus resides on ports 7, 8, and 9 and operates with
either an 8 or 16-bit data path. The configuration of 8 or 16 bit mode is specified by CPU
firmware writing to configuration registers at run-time. If the application does not use the EMI
bus, then these port pins may be used for general purpose I/O as shown in Table 3.
The EMI has the following features:
Supports static asynchronous memory access cycles, including page mode for non-mux
operation.
Four configurable memory regions, each with a chip select output (EMI_CS0n ...
EMI_CS3n)
Programmable wait states per memory region for both write and read operations
16-bit multiplexed data mode (Figure 4): 16 bits of data and 16 bits of low-order address
are multiplexed together on ports 8 and 9, while port 7 contains eight more high-order
address signals. The output signal on pin EMI_ALE is used to demultiplex the signals on
ports 8 and 9, and the polarity of EMI_ALE is programmable. The output signals on pins
EMI_BWR_WRLn and EMI_WRHn are the write strobes for the low and high data bytes
相关PDF资料
PDF描述
STW0Q14A SINGLE COLOR LED, WHITE
STW0Q2PA SINGLE COLOR LED, WHITE
STW1145LTM SINGLE COLOR LED, WHITE, 1.9 mm
STW8T16A SINGLE COLOR LED, WHITE
STWD100NWWY3F PROGRAMMABLE TIMER, PDSO5
相关代理商/技术参数
参数描述
STR912FW42X6 制造商:STMicroelectronics 功能描述:256K Flash 96K sram Ethernet USB CAN
STR912FW42X6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:ARM966E-S TM 16/32-Bit Flash MCU with Ethernet, USB, CAN, AC motor control, 4 timers, ADC, RTC, DMA
STR912FW44X6 功能描述:ARM微控制器 - MCU TQFP 128 14x14x1.4 1 RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
STR912FW44X6 制造商:STMicroelectronics 功能描述:512K Flash 96K sram Ethernet USB CAN
STR912FW44X6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:ARM966E-S TM 16/32-Bit Flash MCU with Ethernet, USB, CAN, AC motor control, 4 timers, ADC, RTC, DMA