参数资料
| 型号： | SY69753LHI TR |
| 厂商： | Micrel Inc |
| 文件页数： | 5/13页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK/DATA RECVRY 3.3V 32TQFP |
| 标准包装： | 1,000 |
| 类型： | 时钟和数据恢复（CDR），多路复用器 |
| PLL： | 是 |
| 主要目的： | 以太网，SONET/SDH，ATM OC-3 |
| 输入： | PECL |
| 输出： | PECL |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:3 |
| 差分 - 输入:输出： | 是/是 |
| 频率 - 最大： | 155Mbps |
| 电源电压： | 3.15 V ~ 3.45 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-TQFP 裸露焊盘 |
| 供应商设备封装： | 32-EPAD-TQFP |
| 包装： | 带卷 (TR) |
| 其它名称： | SY69753LHITR SY69753LHITR-ND |
2012 Microchip Technology Inc.
Preliminary
DS22292A-page 13
MCP7940M
With bits RS1 and RS0 set to ‘00’, the calibration
function can be expressed as:
Since the calibration is done once per minute (i.e.,
when the internal minute counter is incremented), only
one cycle in sixty of the MFP output waveform is
affected by the calibration setting. Also note that the
duty cycle of the MFP output waveform will not
necessarily be at 50% when the calibration setting is
applied.
With bits RS1 and RS0 set to ‘01’ or ‘10’, the
calibration function can not be expressed in terms of
the input clock period. In the case where the MSB of
the Calibration register is set to ‘0’, the waveform
appearing at the MFP output pin will be “delayed”,
once per minute, by twice the number of input clock
cycles defined in the Calibration register. The MFP
waveform will appear as:
FIGURE 4-2:
RS1 AND RS0 WITH AND WITHOUT CALIBRATION
In the case where the MSB of the Calibration register
is set to ‘1’, the MFP output waveforms that appear
when bits RS1 and RS0 are set to ‘01’ or ‘10’ are not
as responsive to the setting of the Calibration register.
For example, when outputting the 4.096 kHz
waveform (RS1, RS0 set to ‘01’), the output waveform
is generated using only eight input clock cycles.
Consequently, attempting to subtract more than eight
input clock cycles from this output does not have a
meaningful effect on the resulting waveform. Any
effect on the output will appear as a modification in
both the frequency and duty cycle of the waveform
appearing on the MFP output pin.
B.RS2 BIT SET TO ‘1’
With the RS2 bit set to ‘1’, the following internal timing
signal is output on the MFP pin:
The frequency listed in the table presumes an input
clock source of exactly 32.768 kHz. In terms of the
equivalent number of input clock cycles, the table
becomes:
Unlike
the
method
previously
described,
the
calibration setting is continuously applied and affects
every cycle of the output waveform. This results in the
modulation of the frequency of the output waveform
based upon the setting of the Calibration register.
Using this setting, the calibration function can be
expressed as:
Since the calibration is done every cycle, the frequency
of the output MFP waveform is constant.
Toutput
=
(32768 +/- (2 * CALREG)) Tinput
where:
Toutput
=
clock period of MFP output signal
Tinput
=
clock period of input signal
CALREG
=
decimal value of the Calibration
register setting and the sign is
determined by the MSB of the
Calibration register.
Delay
RS2
RS1
RS0
Output Signal
1x
x
64.0 Hz
RS2
RS1
RS0
Output Signal
1x
x
512
Toutput = (2 * (256 +/- (2 * CALREG))) Tinput
where:
Toutput = clock period of MFP output signal
Tinput = clock period of input signal
CALREG
=
decimal value of the Calibration
register setting, and the sign is
determined by the MSB of the
Calibration register.
相关PDF资料 |
PDF描述 |
|---|---|
| SY69754ALHG | IC CLOCK/DATA REC 622MBPS 32TQFP |
| SY69952ZC TR | IC TXRX CLOCK RECOVERY 28-SOIC |
| SY87700ALZG TR | IC CLOCK/DATA RECOVERY 28-SOIC |
| SY87700LZI | IC CLOCK/DATA RECOVERY 28-SOIC |
| SY87700VHC | IC CLOCK/DATA RECOVERY 32-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SY69753LHYTR | 制造商:Micrel Inc 功能描述:3.3V,125MBPS, 155MBPS CLOCK AND DATA RECOVERY |
| SY69754AL | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:3.3V, 622Mbps Clock and Data Recovery |
| SY69754AL_07 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:3.3V, 622Mbps Clock and Data Recovery |
| SY69754ALHG | 功能描述:计时器和支持产品 3.3V 622 Mbps CDR (I Temp, Green/32 pin TQFP/bulk) RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| SY69754ALHG TR | 功能描述:计时器和支持产品 3.3V 622 Mbps CDR (I Temp, Green/32 pin TQFP/T+R) RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。