- 您现在的位置：买卖IC网 > PDF目录98188 > TDA1308TD-G (NXP SEMICONDUCTORS) 0.06 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO8 PDF资料下载
参数资料
| 型号： | TDA1308TD-G |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 0.06 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO8 |
| 封装： | PLASTIC, SO-8 |
| 文件页数： | 3/26页 |
| 文件大小： | 197K |
| 代理商： | TDA1308TD-G |
August 1994
12
Philips Semiconductors
Product specication
Class AB stereo headphone driver
TDA1308
SOLDERING
Plastic dual in-line packages
BY DIP OR WAVE
The maximum permissible temperature of the solder is
260
°C; this temperature must not be in contact with the
joint for more than 5 s. The total contact time of successive
solder waves must not exceed 5 s.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified storage maximum. If the printed-circuit board has
been pre-heated, forced cooling may be necessary
immediately after soldering to keep the temperature within
the permissible limit.
REPAIRING SOLDERED JOINTS
Apply the soldering iron below the seating plane (or not
more than 2 mm above it). If its temperature is below
300
°C, it must not be in contact for more than 10 s; if
between 300 and 400
°C, for not more than 5 s.
Plastic small outline packages
BY WAVE
During placement and before soldering, the component
must be fixed with a droplet of adhesive. After curing the
adhesive, the component can be soldered. The adhesive
can be applied by screen printing, pin transfer or syringe
dispensing.
Maximum permissible solder temperature is 260
°C, and
maximum duration of package immersion in solder bath is
10 s, if allowed to cool to less than 150
°C within 6 s.
Typical dwell time is 4 s at 250
°C.
A modified wave soldering technique is recommended
using two solder waves (dual-wave), in which a turbulent
wave with high upward pressure is followed by a smooth
laminar wave. Using a mildly-activated flux eliminates the
need for removal of corrosive residues in most
applications.
BY SOLDER PASTE REFLOW
Reflow soldering requires the solder paste (a suspension
of fine solder particles, flux and binding agent) to be
applied to the substrate by screen printing, stencilling or
pressure-syringe dispensing before device placement.
Several techniques exist for reflowing; for example,
thermal conduction by heated belt, infrared, and
vapour-phase reflow. Dwell times vary between 50 and
300 s according to method. Typical reflow temperatures
range from 215 to 250
°C.
Preheating is necessary to dry the paste and evaporate
the binding agent. Preheating duration: 45 min at 45
°C.
REPAIRING SOLDERED JOINTS (BY HAND-HELD SOLDERING
IRON OR PULSE
-HEATED SOLDER TOOL)
Fix the component by first soldering two, diagonally
opposite, end pins. Apply the heating tool to the flat part of
the pin only. Contact time must be limited to 10 s at up to
300
°C. When using proper tools, all other pins can be
soldered in one operation within 2 to 5 s at between 270
and 320
°C. (Pulse-heated soldering is not recommended
for SO packages.)
For pulse-heated solder tool (resistance) soldering of VSO
packages, solder is applied to the substrate by dipping or
by an extra thick tin/lead plating before package
placement.
相关PDF资料 |
PDF描述 |
|---|---|
| TDA1308T/N1,115 | 0.06 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO8 |
| TDA1309HGP | SPECIALTY ANALOG CIRCUIT, PQFP44 |
| TDA1310AT-T | SERIAL INPUT LOADING, 0.2 us SETTLING TIME, 16-BIT DAC, PDSO8 |
| TDA1310ATD-T | SERIAL INPUT LOADING, 0.2 us SETTLING TIME, 16-BIT DAC, PDSO8 |
| TDA1310AN | SERIAL INPUT LOADING, 0.2 us SETTLING TIME, 16-BIT DAC, PDIP8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA1308TT | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Class-AB stereo headphone driver |
| TDA1308TT/N1,118 | 功能描述:音频放大器 STEREO HEADPHONE DRIVER-TSSOP RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA1308TT/N2 | 制造商:NXP Semiconductors 功能描述:AMP AUDIO .08W STER AB 8TSSOP 制造商:NXP Semiconductors 功能描述:AMP, AUDIO, .08W, STER, AB, 8TSSOP |
| TDA1308TT/N2,118 | 功能描述:音频放大器 STEREO HDPHON DRVR RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDA1308TT/N2118 | 制造商:NXP Semiconductors 功能描述:IC AUDIO AMP AB 40mW TSSOP-8 |
发布紧急采购，3分钟左右您将得到回复。