参数资料
型号: TDA6111Q/N4
厂商: NXP SEMICONDUCTORS
元件分类: 音频/视频放大
英文描述: 1 CHANNEL, VIDEO AMPLIFIER, PZFM9
封装: PLASTIC, SOT-111, DIL-BENT-SIL, 9 PIN
文件页数: 5/18页
文件大小: 114K
代理商: TDA6111Q/N4
1995 Feb 07
13
Philips Semiconductors
Preliminary specication
Video output amplier
TDA6111Q
SOLDERING
Plastic single in-line packages
BY DIP OR WAVE
The maximum permissible temperature of the solder is
260
°C; this temperature must not be in contact with the
joint for more than 5 s. The total contact time of successive
solder waves must not exceed 5 s.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified storage maximum. If the printed-circuit board has
been pre-heated, forced cooling may be necessary
immediately after soldering to keep the temperature within
the permissible limit.
REPAIRING SOLDERED JOINTS
Apply the soldering iron below the seating plane (or not
more than 2 mm above it). If its temperature is below
300
°C, it must not be in contact for more than 10 s; if
between 300 and 400
°C, for not more than 5 s.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specication
This data sheet contains target or goal specications for product development.
Preliminary specication
This data sheet contains preliminary data; supplementary data may be published later.
Product specication
This data sheet contains nal product specications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specication
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specication.
相关PDF资料
PDF描述
TDA8822M/C1 SPECIALTY CONSUMER CIRCUIT, PDSO24
TDA8822MDB-T SPECIALTY CONSUMER CIRCUIT, PDSO24
TDA8822MDB SPECIALTY CONSUMER CIRCUIT, PDSO24
TDA8822T/C1 SPECIALTY CONSUMER CIRCUIT, PDSO24
TDA8822TD SPECIALTY CONSUMER CIRCUIT, PDSO24
相关代理商/技术参数
参数描述
TDA6111QU 功能描述:视频放大器 VIDEO OUTPUT AMP RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel
TDA6118JF/N1 制造商:NXP Semiconductors 功能描述:6118JF/N1 制造商:Philips E C G Inc 功能描述:6118JF/N1
TDA6118JF-N2 制造商:Panasonic Industrial Company 功能描述:IC
TDA6120 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Video output amplifier
TDA6120Q 制造商:Panasonic Industrial Company 功能描述:SUB ONLY P-C1AA00000326 IC SUBBING WITH C1AA00000326