- 您现在的位置：买卖IC网 > PDF目录98246 > TLE5250 (INFINEON TECHNOLOGIES AG) STEPPER MOTOR CONTROLLER, 3 A, PZFM15 PDF资料下载
参数资料
| 型号： | TLE5250 |
| 厂商： | INFINEON TECHNOLOGIES AG |
| 元件分类： | 运动控制电子 |
| 英文描述： | STEPPER MOTOR CONTROLLER, 3 A, PZFM15 |
| 封装： | PLASTIC, SIP-15 |
| 文件页数： | 1/22页 |
| 文件大小： | 142K |
| 代理商： | TLE5250 |
Semiconductor Group
1
1998-02-01
2.5-A High Performance Smart Power
Stepper-Motor Driver with Diagnostic Interface
SPT-IC
Overview
Features
Single phase driver for stepper motor 2.5 A
Low ON-resistance (typical 0.3
)
Wide supply range 6 V to 45 V
Wide current range 10 mA to 3 A
Fast nominal/actual comparator for micro
stepper mode
Wide temperature range
Short circuit protection
Under voltage shutdown
Overtemperature shutdown
Serial diagnostic interface
Fast freewheeling diodes
TTL-compatible inputs
P-SIP-15-1
TLE 5250
Description
TLE 5250 is a monolithic IC in Smart Power technology for controlling and regulating the
motor current in one phase of a bipolar stepping motor. There are other applications in
driving DC motors and inductive loads that are operated on constant current.
The device has TTL-compatible logic inputs, includes a H-bridge with integrated, fast
free-wheeling diodes plus dynamic limiting of the motor current by a chopper mode. The
nominal current can be set continuously by a control voltage. Microstep mode can be
produced by applying a sinusoidal control voltage. Two TLE 5250s, with a minimum of
external circuitry and a single supply voltage, form a complete system - that can be
driven direct by an MC- for two-phase, bipolar stepping motors with output current of up
to 2.5 A per phase. The outputs of the IC are internally protected against shorted to
ground, supply voltage and shorted load. The output stages are also disabled by
undervoltage and overtemperature. All fault functions can be detected by the internal
diagnostics, which can be read out serially.
Type
Ordering Code
Package
TLE 5250
Q67000-A9103
P-SIP-15-1
相关PDF资料 |
PDF描述 |
|---|---|
| TLE6208-3G | BRUSH DC MOTOR CONTROLLER, 1.2 A, PDSO14 |
| TLE6208-6G | BRUSH DC MOTOR CONTROLLER, 2 A, PDSO28 |
| TLE6210G | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO20 |
| TLE6266G | SPECIALTY ANALOG CIRCUIT, PDSO28 |
| TLE6280GP | BRUSHLESS DC MOTOR CONTROLLER, PDSO36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLE6208-3G | 功能描述:马达/运动/点火控制器和驱动器 Triple-Half-Bridge RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| TLE6208-3-G | 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:Triple-Half-Bridge |
| TLE6208-3G_07 | 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:Triple Half Bridges Optimized for DC motor management applications |
| TLE62083GXUMA1 | 制造商:Infineon Technologies AG 功能描述:Triple Half Bridge Motor Driver 14-Pin DSO 制造商:Infineon Technologies AG 功能描述:BODY BRIDGES - Tape and Reel 制造商:Infineon Technologies AG 功能描述:IC MOTOR DRIVER SPI 14DSO |
| TLE6208-6 | 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:Hex-Half-Bridge / Double Six-Driver |
发布紧急采购，3分钟左右您将得到回复。