参数资料
型号: TOOLSTICK300DC
厂商: Silicon Laboratories Inc
文件页数: 17/178页
文件大小: 0K
描述: TOOLSTICK DAUGHTER CARD
标准包装: 1
系列: ToolStick
类型: MCU
适用于相关产品: C8051F300
所含物品: 子卡
Rev. 2.9
113
C8051F300/1/2/3/4/5
The direction bit (R/W) occupies the least significant bit position of the address byte. The direction bit is set
to logic 1 to indicate a "READ" operation and cleared to logic 0 to indicate a "WRITE" operation.
All transactions are initiated by a master, with one or more addressed slave devices as the target.
The
master generates the START condition and then transmits the slave address and direction bit. If the trans-
action is a WRITE operation from the master to the slave, the master transmits the data a byte at a time
waiting for an ACK from the slave at the end of each byte. For READ operations, the slave transmits the
data waiting for an ACK from the master at the end of each byte. At the end of the data transfer, the master
generates a STOP condition to terminate the transaction and free the bus. Figure 13.3 illustrates a typical
SMBus transaction.
SLA6
SDA
SLA5-0
R/W
D7
D6-0
SCL
Slave Address + R/W
Data Byte
START
ACK
NACK
STOP
Figure 13.3. SMBus Transaction
13.3.1. Arbitration
A master may start a transfer only if the bus is free. The bus is free after a STOP condition or after the SCL
and SDA lines remain high for a specified time (see Section “13.3.4. SCL High (SMBus Free) Timeout”
on page 114). In the event that two or more devices attempt to begin a transfer at the same time, an arbi-
tration scheme is employed to force one master to give up the bus. The master devices continue transmit-
ting until one attempts a HIGH while the other transmits a LOW. Since the bus is open-drain, the bus will
be pulled LOW. The master attempting the HIGH will detect a LOW SDA and lose the arbitration. The win-
ning master continues its transmission without interruption; the losing master becomes a slave and
receives the rest of the transfer if addressed. This arbitration scheme is non-destructive: one device
always wins, and no data is lost.
相关PDF资料
PDF描述
TOOLSTICK411DC TOOLSTICK DAUGHTER CARD
TOOLSTICK336DC DAUGHTER CARD TOOLSTICK C8051F33
SDR-2 SCOTCH CODE REFILL # 2
0210490198 CABLE JUMPER 1.25MM .127M 14POS
RSM08DRTH CONN EDGECARD 16POS DIP .156 SLD
相关代理商/技术参数
参数描述
TOOLSTICK300PP 功能描述:插座和适配器 Dev Tool for C8051F30X MCUs RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK300SPP 功能描述:插座和适配器 TS for F300-F305 SOIC 14 MCUs RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK310PP 功能描述:插座和适配器 C8051F310/12/14 F361 F364 F366 F368 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK311DC 功能描述:子卡和OEM板 ToolStick C8051F311 Daughter Card RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
TOOLSTICK311PP 功能描述:插座和适配器 C8051F311/13/15 F362 F365 F367 F369 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x