参数资料
| 型号： | TPABASEKITEVM |
| 厂商： | Texas Instruments |
| 文件页数： | 26/32页 |
| 文件大小： | 0K |
| 描述： | EVAL MODULE AUDIO AMP PLATFORM |
| 标准包装： | 1 |
| 主要目的： | 音频，音频处理 |
| 嵌入式： | 否 |
| 已用 IC / 零件： | TI's Audio EVM Boards |
| 主要属性： | 即插即用立体声设备的插口 / 单声道功率放大器 EVM 板 |
| 次要属性： | 还可测试输入信号调节 EVM 板，以及耳机放大器 EVM 板 |
| 已供物品： | 板 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页
Power
With an AC voltage applied to J2, V CC bus voltage depends on several factors,
including the load on the bus. As a general rule for typical AC voltage inputs,
however, V CC bus voltage will be approximately the peak value of the applied
AC voltage.
The bridge rectifier also causes the platform ground bus to be approximately
0.7 V above the ground of other equipment that might be operated by the same
external power supply. Platform V CC and EVM voltage measurements should
be referenced to the platform ground bus (test point TP1, for example) and not
the external power supply ground when V CC voltage is supplied from J2.
V CC voltage MUST NOT exceed 15 V or the overvoltage protection circuit on
the V CC bus will trip.
3.3.3.5
3.3.3.6
3-10
Regulated DC From On-Board Regulator (Socket U6)
A power supply/voltage regulator EVM can be installed in platform socket U6
to provide a a regulated V DD voltage (3.3 V or 5 V typical) for audio evaluation
modules installed on the platform that require it. The regulator EVM uses
power from the V CC bus as an input and provides the appropriate regulated
voltage to the platform V DD line.
V DD voltage also appears at screw terminals J6, where it can be used as a
source of regulated power for off-board use, subject to the maximum current
capabilities of the regulator module installed in U6 and the platform V CC
supply.
Do not allow the V CC voltage to exceed the maximum specified for the installed
power supply/voltage regulator EVM.
Regulated External DC at Screw Terminals J6
Regulated voltage (3.3 V or 5 V typical — 6 V maximum) from an external
source can be connected to screw terminals J6 to supply the platform V DD line
for audio evaluation modules installed on the platform that require a regulated
V DD supply.
Voltage applied to screw terminals J6 MUST be of the correct polarity and
MUST NOT exceed 6.1 V or the power protection circuit on the V DD line will
trip.
Details
相关PDF资料 |
PDF描述 |
|---|---|
| TPH-600 | FUSE TELPOWER 600A 170V PWR DIST |
| TPHCS800-P | FUSEHOLDER W/SWITCH 300-800A UL |
| TPL-CZH | FUSE TELPOWER 800A 170VDC |
| TPS-70L | FUSE TELPOWER 70A 170VDC AXIAL |
| TPS2052BEVM-293 | TPS2052BEVM-293 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPA-BNC | 功能描述:测试配件 - 其他 TekVPI Interface adapter RoHS:否 制造商:Tektronix 附件类型:Soft Case 颜色:Gray 设备类型:Transit Case 产品:Accessories |
| TPAC175D-490 | 制造商:TOTAL-POWER 制造商全称:TOTAL-POWER 功能描述:UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC HOT-SWAP CompactPCI QUAD OUTPUT 175 WATTS CURRENT SHARING SWITCHING POWER SUPPLIES TPAC175P & TPAC175D SE |
| TPAC175D-490O | 制造商:TOTAL-POWER 制造商全称:TOTAL-POWER 功能描述:UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC HOT-SWAP CompactPCI QUAD OUTPUT 175 WATTS CURRENT SHARING SWITCHING POWER SUPPLIES TPAC175P & TPAC175D SE |
| TPAC175P | 制造商:TOTAL-POWER 制造商全称:TOTAL-POWER 功能描述:UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC HOT-SWAP CompactPCI QUAD OUTPUT 175 WATTS CURRENT SHARING SWITCHING POWER SUPPLIES TPAC175P & TPAC175D SE |
| TPAC175P-490 | 制造商:TOTAL-POWER 制造商全称:TOTAL-POWER 功能描述:UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC HOT-SWAP CompactPCI QUAD OUTPUT 175 WATTS CURRENT SHARING SWITCHING POWER SUPPLIES TPAC175P & TPAC175D SE |
发布紧急采购，3分钟左右您将得到回复。