参数资料
型号: TPS2501DRCT
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 6 A SWITCHING REGULATOR, 1075 kHz SWITCHING FREQ-MAX, PDSO10
封装: 3 X 3 MM, 0.90 MM HEIGHT, PLASTIC, SON-10
文件页数: 8/41页
文件大小: 1641K
代理商: TPS2501DRCT
OS(max)
0.93
ILIM
27,570 V
I
(mA)
R
k
=
W
OS(typ)
0.998
ILIM
28,235 V
I
(mA)
R
k
=
W
OS(min)
1.114
ILIM
32,114 V
I
(mA)
R
k
=
W
SLVS886C – OCTOBER 2008 – REVISED AUGUST 2010
www.ti.com
Programming the Current-Limit Threshold Resistor RILIM
The overcurrent threshold is user programmable via an external resistor. The TPS2500 uses an internal
regulation loop to provide a regulated voltage on the ILIM pin. The current-limit threshold is proportional to the
current sourced out of ILIM. The recommended 1% resistor range for RILIM is 16.1 k ≤ RILIM ≤ 200 k to ensure
stability of the internal regulation loop. Many applications require that the minimum current limit is above a certain
current level or that the maximum current limit is below a certain current level, so it is important to consider the
tolerance of the overcurrent threshold when selecting a value for RILIM. The following equations and Figure 13
can be used to calculate the resulting overcurrent threshold for a given external resistor value ILIM). Figure 13
includes current-limit tolerance due to variations caused by temperature and process. However, the equations do
not account for tolerance due to external resistor variation, so it is important to account for this tolerance when
selecting RILIM. The traces routing the RILIM resistor to the TPS2500 should be as short as possible to reduce
parasitic effects on the current-limit accuracy.
RILIM can be selected to provide a current-limit threshold that occurs 1) above a minimum load current or 2)
below a maximum load current.
To design above a minimum current-limit threshold, find the intersection of RILIM and the maximum desired load
current on the IOS(min) curve and choose a value of RILIM below this value. Programming the current limit above a
minimum threshold is important to ensure start up into full load or heavy capacitive loads. The resulting maximum
current-limit threshold is the intersection of the selected value of RILIM and the IOS(max) curve.
To design below a maximum current-limit threshold, find the intersection of RILIM and the maximum desired load
current on the IOS(max) curve and choose a value of RILIM above this value. Programming the current limit below a
maximum threshold is important to avoid current-limiting upstream power supplies, causing the input voltage bus
to droop. The resulting minimum current-limit threshold is the intersection of the selected value of RILIM and the
IOS(min) curve.
Current-limit threshold equations (IOS):
16
Copyright 2008–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS2500 TPS2501
相关PDF资料
PDF描述
TPS650242RHBR 2-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC32
TC74LVX4053F TRIPLE 2-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16
TS3L301DGVRE4 8-CHANNEL, DIFFERENTIAL MULTIPLEXER, PDSO48
TS2576CZ550C0 SWITCHING REGULATOR, 58 kHz SWITCHING FREQ-MAX, SFM5
TC151A5825EOA723 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
相关代理商/技术参数
参数描述
TPS2501EVM-337 功能描述:电源管理IC开发工具 Eval Mod for TPS2501 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
TPS2505B1RGWR 功能描述:电源开关 IC - USB Integrated Dual USB Pwr Switch RoHS:否 制造商:Micrel 电源电压-最小:2.7 V 电源电压-最大:5.5 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-8 封装:Tube
TPS2511DGN 功能描述:热插拔功率分布 Charging Port Cntrlr & Crnt Ltd Pwr Sw RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2511DGNR 功能描述:热插拔功率分布 Charging Port Cntrlr & Crnt Ltd Pwr Sw RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2511EVM-141 功能描述:电源管理IC开发工具 TPS2511 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V