参数资料
型号: TPS54140DGQR
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
封装: GREEN, PLASTIC, MSOP-10
文件页数: 10/46页
文件大小: 1778K
代理商: TPS54140DGQR
SS/TR
TPS54140
EN
PWRGD
SS / TR
EN
PWRGD
VOUT 1
VOUT 2
R 1
R 2
R3
R 4
TPS54140
SLVS889 – OCTOBER 2008 .............................................................................................................................................................................................. www.ti.com
DETAILED DESCRIPTION (continued)
Figure 33 shows a method for ratio-metric start up sequence by connecting the SS/TR pins together. The
regulator outputs will ramp up and reach regulation at the same time. When calculating the slow start time the
pull up current source must be doubled in Equation 6. Figure 34 shows the results of Figure 33.
Figure 35. Schematic for Ratiometric and Simultaneous Start-Up Sequence
Ratio-metric and simultaneous power supply sequencing can be implemented by connecting the resistor network
of R1 and R2 shown in Figure 35 to the output of the power supply that needs to be tracked or another voltage
reference source. Using Equation 7 and Equation 8, the tracking resistors can be calculated to initiate the Vout2
slightly before, after or at the same time as Vout1. Equation 9 is the voltage difference between Vout1 and Vout2
at the 95% of nominal output regulation.
The deltaV variable is zero volts for simultaneous sequencing. To minimize the effect of the inherent SS/TR to
VSENSE offset (Vssoffset) in the slow start circuit and the offset created by the pullup current source (Iss) and
tracking resistors, the Vssoffset and Iss are included as variables in the equations.
To design a ratio-metric start up in which the Vout2 voltage is slightly greater than the Vout1 voltage when Vout2
reaches regulation, use a negative number in Equation 7 through Equation 9 for deltaV. Equation 9 will result in a
positive number for applications which the Vout2 is slightly lower than Vout1 when Vout2 regulation is achieved.
Since the SS/TR pin must be pulled below 40mV before starting after an EN, UVLO or thermal shutdown fault,
careful selection of the tracking resistors is needed to ensure the device will restart after a fault. Make sure the
calculated R1 value from Equation 7 is greater than the value calculated in Equation 10 to ensure the device can
recover from a fault.
As the SS/TR voltage becomes more than 85% of the nominal reference voltage the Vssoffset becomes larger
as the slow start circuits gradually handoff the regulation reference to the internal voltage reference. The SS/TR
pin voltage needs to be greater than 1.3V for a complete handoff to the internal voltage reference as shown in
18
Copyright 2008, Texas Instruments Incorporated
Product Folder Link(s): TPS54140
相关PDF资料
PDF描述
TPS54140DGQ SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
TPS54162QPWPRQ1 3 A SWITCHING REGULATOR, 2200 kHz SWITCHING FREQ-MAX, PDSO20
TPS5420DR 5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
TPS5420D 6.5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
TPS54226PWP DUAL SWITCHING CONTROLLER, PDSO20
相关代理商/技术参数
参数描述
TPS54140EVM-429 功能描述:电源管理IC开发工具 1.5A,25-42V In SWIFT Cnvrtr Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
TPS54140-Q1 制造商:TI 制造商全称:Texas Instruments 功能描述:1.5-A 42-V STEP-DOWN SWIFTa?¢ DC/DC CONVERTER WITH Eco-modea?¢ CONTROL
TPS54140QDGQRQ1 功能描述:直流/直流开关调节器 AC 3.5-42V Inp,1.5A RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS54140QDRCRQ1 功能描述:直流/直流开关调节器 AC 3.5-42V Inp,1.5A RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS54160 制造商:TI 制造商全称:Texas Instruments 功能描述:1.5-A, 60-V, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE