- 您现在的位置：买卖IC网 > PDF目录98282 > TPS54240QDGQRQ1 (TEXAS INSTRUMENTS INC) 2.5 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10 PDF资料下载
参数资料
| 型号： | TPS54240QDGQRQ1 |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 2.5 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10 |
| 封装： | GREEN, PLASTIC, MSOP-10 |
| 文件页数： | 16/48页 |
| 文件大小： | 1447K |
| 代理商： | TPS54240QDGQRQ1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
RT/CLK
TPS54240
Clock
Source
PLL
Rfset
10pF
4kW
50 W
EXT
SLVSAQ4A
– DECEMBER 2010 – REVISED APRIL 2011
DETAILED DESCRIPTION (continued)
How to Interface to RT/CLK Pin
The RT/CLK pin can be used to synchronize the regulator to an external system clock. To implement the
synchronization feature connect a square wave to the RT/CLK pin through the circuit network shown in
Figure 42. The square wave amplitude must transition lower than 0.5V and higher than 2.2V on the RT/CLK pin
and have an on time greater than 40 ns and an off time greater than 40 ns. The synchronization frequency range
is 300 kHz to 2200 kHz. The rising edge of the PH will be synchronized to the falling edge of RT/CLK pin signal.
The external synchronization circuit should be designed in such a way that the device will have the default
frequency set resistor connected from the RT/CLK pin to ground should the synchronization signal turn off. It is
recommended to use a frequency set resistor connected as shown in Figure 42 through a 50
resistor to
ground. The resistor should set the switching frequency close to the external CLK frequency. It is recommended
to ac couple the synchronization signal through a 10 pF ceramic capacitor to RT/CLK pin and a 4k
series
resistor. The series resistor reduces PH jitter in heavy load applications when synchronizing to an external clock
and in applications which transition from synchronizing to RT mode. The first time the CLK is pulled above the
CLK threshold the device switches from the RT resistor frequency to PLL mode. The internal 0.5V voltage source
is removed and the CLK pin becomes high impedance as the PLL starts to lock onto the external signal. Since
there is a PLL on the regulator the switching frequency can be higher or lower than the frequency set with the
external resistor. The device transitions from the resistor mode to the PLL mode and then will increase or
decrease the switching frequency until the PLL locks onto the CLK frequency within 100 microseconds.
When the device transitions from the PLL to resistor mode the switching frequency will slow down from the CLK
frequency to 150 kHz, then reapply the 0.5V voltage and the resistor will then set the switching frequency. The
switching frequency is divided by 8, 4, 2, and 1 as the voltage ramps from 0 to 0.8 volts on VSENSE pin. The
device implements a digital frequency shift to enable synchronizing to an external clock during normal startup
and fault conditions. Figure 43, Figure 44 and Figure 45 show the device synchronized to an external system
clock in continuous conduction mode (ccm) discontinuous conduction (dcm) and pulse skip mode (psm).
Figure 42. Synchronizing to a System Clock
Copyright
2010–2011, Texas Instruments Incorporated
23
相关PDF资料 |
PDF描述 |
|---|---|
| TPS54260DGQR | SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10 |
| TPS54260QDGQRQ1 | 2.5 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10 |
| TPS5430MDDAREPG4 | 8.5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8 |
| TPS54310MPWPREP | 6 A SWITCHING REGULATOR, 775 kHz SWITCHING FREQ-MAX, PDSO20 |
| TPS54310PWPRG4 | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS54240QDRCRQ1 | 功能描述:Buck, Split Rail Switching Regulator IC Positive Adjustable 0.8V 1 Output 2.5A 10-VFDFN Exposed Pad 制造商:texas instruments 系列:汽车级，AEC-Q100，SWIFT?，Eco-Mode? 包装:剪切带（CT） 零件状态:有效 功能:降压 输出配置:正 拓扑:降压，分离轨 输出类型:可调式 输出数:1 电压 - 输入（最小值）:3.5V 电压 - 输入（最大值）:42V 电压 - 输出（最小值/固定）:0.8V 电压 - 输出（最大值）:39V 电流 - 输出:2.5A 频率 - 开关:100kHz ~ 2.5MHz 同步整流器:无 工作温度:-40°C ~ 125°C（TA） 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商器件封装:10-VSON（3x3） 标准包装:1 |
| TPS54260 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3.5V to 60V INPUT, 2.5A, STEP DOWN CONVERTER WITH ECO-MODE? |
| TPS54260_1 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3.5V to 60V INPUT, 2.5A, STEP DOWN CONVERTER WITH ECO-MODE? |
| TPS54260_2 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3.5V to 60V INPUT, 2.5A, STEP DOWN CONVERTER WITH ECO-MODE? |
| TPS54260DGQ | 功能描述:直流/直流开关调节器 3.5-60V 2.5A 2.5MHz Step Down Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。