参数资料
| 型号： | TPS62125DSGT |
| 厂商： | Texas Instruments |
| 文件页数： | 20/38页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 0.3A 8WSON |
| 标准包装： | 1 |
| 系列： | DCS-Control™ |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 1.2 V ~ 10 V |
| 输入电压： | 3 V ~ 17 V |
| PWM 型： | 混合物 |
| 频率 - 开关： | 1MHz |
| 电流 - 输出： | 300mA |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 包装： | 标准包装 |
| 供应商设备封装： | 8-WSON 裸露焊盘（2x2） |
| 其它名称： | 296-30461-6 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页
SLVSAQ5C – MARCH 2012 – REVISED DECEMBER 2013
DETAILED DESCRIPTION
DCS - Control TM
The TPS62125 high efficiency synchronous switch mode buck converter includes TI's DCS - Control? (Direct
Control with Seamless Transition into Power Save Mode), an advanced regulation topology, which combines the
advantages of hysteretic and voltage mode control. Characteristics of DCS - Control TM are excellent AC load
regulation and transient response, low output ripple voltage and a seamless transition between PFM and PWM
mode operation.
DCS - Control TM includes an AC loop which senses the output voltage (VOS pin) and directly feeds the
information to a fast comparator stage. This comparator sets the switching frequency, which is constant for
steady state operating conditions, and provides immediate response to dynamic load changes. In order to
achieve accurate DC load regulation, a voltage feedback loop is used. The internally compensated regulation
network achieves fast and stable operation with small external components and low ESR capacitors. The DCS -
Control TM topology supports PWM (Pulse Width Modulation) mode for medium and high load conditions and a
Power Save Mode at light loads. During PWM mode, it operates in continuous conduction. The switch frequency
is up to 1MHz with a controlled frequency variation depending on the input voltage. If the load current decreases,
the converter seamless enters Power Save Mode to maintain high efficiency down to very light loads. In Power
Save Mode the switching frequency varies linearly with the load current. Since DCS - Control TM supports both
operation modes within one single building block, the transition from PWM to Power Save Mode is seamless
without effects on the output voltage. The TPS62125 offers both excellent DC voltage and superior load transient
regulation, combined with very low output voltage ripple, minimizing interference with RF circuits.
At high load currents the converter operates in quasi fixed frequency PWM mode operation and at light loads in
PFM (Pulse Frequency Modulation) mode to maintain highest efficiency over the full load current range. In PFM
Mode, the device generates a single switching pulse to ramp up the inductor current and recharge the output
capacitor, followed by a sleep period where most of the internal circuits are shutdown to achieve a quiescent
current of typically 13μA. During this time, the load current is supported by the output capacitor. The duration of
the sleep period depends on the load current and the inductor peak current.
Pulse Width Modulation (PWM) Operation
The TPS62125 operates with pulse width modulation in continuous conduction mode (CCM) with a nominal
switching frequency of about 1MHz. The frequency variation in PWM mode is controlled and depends on VIN,
VOUT and the inductance. The device operates in PWM mode as long the output current is higher than half the
inductor's ripple current. To maintain high efficiency at light loads, the device enters Power Save Mode at the
boundary to discontinuous conduction mode (DCM). This happens if the output current becomes smaller than
half the inductor's ripple current.
Power Save Mode
With decreasing load current, the TPS62125 transitions seamlessly from PWM Mode to Power Save Mode once
the inductor current becomes discontinuous. This ensures a high efficiency at light loads. In Power Save Mode
the converter operates in Pulse Frequency Modulation (PFM Mode) and the switching frequency decreases
linearly with the load current. DCS - Control TM features a small and predictable output voltage ripple in Power
Save Mode. The transition between PWM Mode and Power Save Mode occurs seamlessly in both directions.
The minimum On Time T ONmin for a single pulse can be estimated by:
T ON =
V OUT
V IN
′ 1 m s
(1)
Therefore the peak inductor current in PFM mode is approximately:
( V IN OUT ) ′ T
- V
I LPFMpeak = ON
L
(2)
20
Copyright ? 2012–2013, Texas Instruments Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| TPS62237DRYT | IC REG BUCK SYNC 3.3V 0.5A 6SON |
| TPS62239DRYR | IC REG BUCK SYNC 1V 0.5A 6SON |
| TPS62410DRCTG4 | IC REG BUCK SYNC ADJ 0.8A 10SON |
| TPS63061DSCT | IC REG BUCK BST SYNC 5V 1A 10SON |
| TPS65217CRSLR | IC PMIC BATT PWR SYST 48VQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS62125EVM-044 | 功能描述:电源管理IC开发工具 TPS62125EVM-044 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| TPS6213013AQRGTRQ1 | 功能描述:IC REG BUCK 1.3V 3A 16VFQFN 制造商:texas instruments 系列:汽车级，AEC-Q100，DCS-Control? 包装:剪切带（CT） 零件状态:在售 功能:降压 输出配置:正 拓扑:降压 输出类型:固定 输出数:1 电压 - 输入（最小值）:3V 电压 - 输入（最大值）:17V 电压 - 输出（最小值/固定）:1.3V 电压 - 输出（最大值）:- 电流 - 输出:3A 频率 - 开关:2.5MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘 供应商器件封装:16-QFN（3x3） 标准包装:1 |
| TPS6213013AQRGTTQ1 | 功能描述:IC REG BUCK 1.3V 3A 16VQFN 制造商:texas instruments 系列:- 包装:剪切带（CT） 零件状态:在售 功能:降压 输出配置:正 拓扑:降压 输出类型:固定 输出数:1 电压 - 输入（最小值）:3V 电压 - 输入（最大值）:17V 电压 - 输出（最小值/固定）:1.3V 电压 - 输出（最大值）:- 电流 - 输出:3A 频率 - 开关:2.5MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘 供应商器件封装:16-QFN（3x3） 标准包装:1 |
| TPS62130AQRGTRQ1 | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 3A 16-VFQFN Exposed Pad 制造商:texas instruments 系列:汽车级，AEC-Q100，DCS-Control? 包装:剪切带（CT） 零件状态:有效 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:3V 电压 - 输入（最大值）:17V 电压 - 输出（最小值/固定）:0.9V 电压 - 输出（最大值）:6V 电流 - 输出:3A 频率 - 开关:2.5MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘 供应商器件封装:16-QFN（3x3） 标准包装:1 |
| TPS62130AQRGTTQ1 | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 3A 16-VFQFN Exposed Pad 制造商:texas instruments 系列:汽车级，AEC-Q100，DCS-Control? 包装:剪切带（CT） 零件状态:有效 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:3V 电压 - 输入（最大值）:17V 电压 - 输出（最小值/固定）:0.9V 电压 - 输出（最大值）:6V 电流 - 输出:3A 频率 - 开关:2.5MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘 供应商器件封装:16-QFN（3x3） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。