参数资料
型号: TPS62660YFFR
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 1.75 A SWITCHING REGULATOR, 6600 kHz SWITCHING FREQ-MAX, BGA6
封装: GREEN, DSBGA-6
文件页数: 11/30页
文件大小: 791K
代理商: TPS62660YFFR
DIL +
V
O
V
I
V
I *
V
O
L
sw
DIL(MAX) + IO(MAX) )
DIL
2
www.ti.com
SLVS871B – FEBRUARY 2010 – REVISED SEPTEMBER 2010
APPLICATION INFORMATION
INDUCTOR SELECTION
The TPS62660 series of step-down converters have been optimized to operate with an effective inductance
value in the range of 0.3mH to 1.3mH and with output capacitors in the range of 4.7mF to 10mF. The internal
compensation is optimized to operate with an output filter of L = 0.47mH and CO = 4.7mF. Larger or smaller
inductor values can be used to optimize the performance of the device for specific operation conditions. For more
details, see the CHECKING LOOP STABILITY section.
The inductor value affects its peak-to-peak ripple current, the PWM-to-PFM transition point, the output voltage
ripple and the efficiency. The selected inductor has to be rated for its dc resistance and saturation current. The
inductor ripple current (
ΔIL) decreases with higher inductance and increases with higher VI or VO.
(1)
with: fSW = switching frequency (6 MHz typical)
L = inductor value
ΔIL = peak-to-peak inductor ripple current
IL(MAX) = maximum inductor current
In high-frequency converter applications, the efficiency is essentially affected by the inductor AC resistance (i.e.
quality factor) and to a smaller extent by the inductor DCR value. To achieve high efficiency operation, care
should be taken in selecting inductors featuring a quality factor above 25 at the switching frequency. Increasing
the inductor value produces lower RMS currents, but degrades transient response. For a given physical inductor
size, increased inductance usually results in an inductor with lower saturation current.
The total losses of the coil consist of both the losses in the DC resistance (R(DC)) and the following
frequency-dependent components:
The losses in the core material (magnetic hysteresis loss, especially at high switching frequencies)
Additional losses in the conductor from the skin effect (current displacement at high frequencies)
Magnetic field losses of the neighboring windings (proximity effect)
Radiation losses
The following inductor series from different suppliers have been used with the TPS62660 converters.
Table 1. List of Inductors
MANUFACTURER
SERIES
DIMENSIONS
LQM21PN1R0NGR
2.0 x 1.2 x 1.0 max. height
MURATA
LQM21PNR54MGC
2.0 x 1.2 x 1.0 max. height
LQM2MPN1R0NG0
2.0 x 1.6 x 1.0 max. height
PANASONIC
ELGTEAR82NA
2.0 x 1.2 x 1.0 max. height
TOKO
MDT2012-CX1R0A
2.0 x 1.2 x 1.0 max. height
TAIYO YUDEN
NM2012NR82, NM2012N1R0
2.0 x 1.2 x 1.0 max. height
FDK
MIPS2012D1R0-X2
2.0 x 1.2 x 1.0 max. height
Copyright 2010, Texas Instruments Incorporated
19
Product Folder Link(s): TPS62660 TPS62665
相关PDF资料
PDF描述
TPS62661YFFT 1.75 A SWITCHING REGULATOR, 6600 kHz SWITCHING FREQ-MAX, BGA6
TPS62660YFFT 1.75 A SWITCHING REGULATOR, 6600 kHz SWITCHING FREQ-MAX, BGA6
TPS62700YZF 1.2 A SWITCHING REGULATOR, 2300 kHz SWITCHING FREQ-MAX, BGA8
TPS62701YZFR 1.2 A SWITCHING REGULATOR, 2300 kHz SWITCHING FREQ-MAX, BGA8
TPS63001DRCTG4 2 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PDSO10
相关代理商/技术参数
参数描述
TPS62660YFFT 功能描述:直流/直流开关转换器 1000mA,6MHz Synch Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62665YFFR 功能描述:直流/直流开关转换器 1000mA6MHz Synch Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62665YFFT 功能描述:直流/直流开关转换器 1000mA6MHz Synch Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62671YFDR 功能描述:直流/直流开关转换器 500mA,6MHz Hi-Eff Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62671YFDT 功能描述:直流/直流开关转换器 500mA,6MHz Hi-Eff Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT