参数资料
型号: TPS65014RGZT
厂商: TEXAS INSTRUMENTS INC
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC48
封装: 7 X 7 MM, GREEN, PLASTIC, VQFN-48
文件页数: 13/57页
文件大小: 1289K
代理商: TPS65014RGZT
www.ti.com
+
Pack+
Pack–
TEMP
Battery Pack
V(HTF)
V(LTF)
LTF
HTF
TS
I(TS)
bqTINY II
NTC
+
Pack+
Pack–
TEMP
Battery Pack
LTF
HTF
TS
bqTINY II
RT1
RT2
NTC
V(HTF)
V(LTF)
I(TS)
Battery Preconditioning
Battery Charge Current
TPS65014
SLVS551 – DECEMBER 2004
DETAILED DESCRIPTION (continued)
Figure 28. TS Pin Configuration
Figure 29. TS Pin Threshold
On power up, if the battery voltage is below the V(LOWV) threshold, the TPS65014 applies a precharge current,
I(PRECHG), to the battery. This feature revives deeply discharged cells. The charge current during this phase is one
tenth of the value in current regulation phase which is set with IO(out) = KSET × V(SET)/R(SET). The load current in
preconditioning phase must be lower than I(PRECHG) and must allow the battery voltage to rise above V(LOWV)
within t(Prechg). VBAT_A is the sense pin to the voltage comparator for the battery voltage. This allows a power-on
sense measurement if the VBAT_A and VBAT_B pins are connected together at the battery.
The TPS65014 activates a safety timer, t(PRECHG), during the conditioning phase. If V(LOWV) threshold is not
reached within the timer period, the TPS65014 turns off the charger and indicates the fault condition in the
CHGSTATUS register. In the case of a fault condition, the TPS65014 reduces the current to I(DETECT). I(DETECT)is
used to detect a battery replacement condition. Fault condition is cleared by POR or battery replacement or via
the serial interface.
TPS65014 offers on-chip current regulation. When charging from an ac adapter, a resistor connected between
the ISET1 and AGND pins determines the charge rate. A maximum of 1-A charger current from the ac adapter is
allowed. When charging from a USB port either a 100-mA or 500-mA charge rate can be selected via the serial
interface; default is 100 mA maximum. Two bits are available in the CHGCONFIG register in the serial interface
to reduce the charge current in 25% steps. These only influence charging from the ac input and may be of use if
charging is often suspended due to excessive junction temperature in the TPS65014 (e.g., at high ac input
voltages) and low battery voltages.
20
相关PDF资料
PDF描述
TPS65020RHAR 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQCC40
TPS65021RHAR 3-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC40
TPS65021RHA 3-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC40
TPS65021RHAT 3-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC40
TPS650231RSB 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC40
相关代理商/技术参数
参数描述
TPS65014RGZT 制造商:Texas Instruments 功能描述:POWER M 2.5~6V FOR LI ION P 48QFN 制造商:Texas Instruments 功能描述:POWER M, 2.5~6V, FOR LI ION P, 48QFN
TPS65014RGZTG4 功能描述:电池管理 Li-Ion Powered Systems RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel
TPS65020ARHAR 制造商:Texas Instruments 功能描述:
TPS65020ARHAT 制造商:Texas Instruments 功能描述:
TPS65020EVM-110 功能描述:电源管理IC开发工具 TPS65020-110 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V