ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATINGS
RECOMMENDED OPERATING CONDITIONS
SLVS754C – MARCH 2007 – REVISED SEPTEMBER 2009 ............................................................................................................................................. www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
over operating free-air temperature range (unless otherwise noted)
(1)
UNITS
Input voltage range on all pins except AGND, PGND, and EN_LDO1 pins with respect to AGND
–0.3 V to 7 V
VI
Input voltage range on EN_LDO1 pin with respect to AGND
–0.3 V to VCC + 0.5 V
Current at VINDCDC1/2, L1, PGND1, L2, PGND2
1800 mA
II
Current at all other pins
1000 mA
VO
Output voltage range for LDO1, LDO2 and LDO3
–0.3 V to 4.0 V
TA
Operating free-air temperature
–40°C to 85°C
TJ
Maximum junction temperature
125°C
Tstg
Storage temperature range
–65°C to 150°C
(1)
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TA ≤ 25°C
DERATING FACTOR
TA = 70°C
TA = 85°C
PACKAGE
RθJA
(1)
POWER RATING
ABOVE TA = 25°C
POWER RATING
RGE
35 K/W
2.8 W
28 mW/K
1.57 W
1.14 W
(1)
The thermal resistance junction to case of the RGE package is 2 K/W measured on a high K board.
MIN
NOM
MAX
UNIT
VINDCDC1/2
Input voltage range for step-down converters
2.5
6
V
VDCDC1
Output voltage range for VDCDC1 step-down converter
0.6
VINDCDC1
V
VDCDC2
Output voltage range for VDCDC2 step-down converter
0.6
VINDCDC2
V
VINLDO1,
Input voltage range for LDOs
1.5
6.5
V
VINLDO2/3
VLDO1-2
Output voltage range for LDO1 and LDO2
1
3.6
V
Output voltage for LDO3 on TPS65053
1.3
V
VLDO3
Output voltage for LDO3 on TPS650531
1.2
Output voltage for LDO3 on TPS650532
1.5
IOUTDCDC1
Output current at L1
1000
mA
L1
Inductor at L1(1)
1.5
2.2
H
CINDCDC1/2
Input capacitor at VINDCDC1/2
(1)
22
F
COUTDCDC1
Output capacitor at VDCDC1
(1)
10
22
F
Output current at L2 for TPS65053
600
mA
IOUTDCDC2
Output current at L2 for TPS650531, TPS650532
1000
L2
Inductor at L2(1)
1.5
2.2
H
COUTDCDC2
Output capacitor at VDCDC2
(1)
10
22
F
CVCC
Input capacitor at VCC (1)
1
F
Cin1-2
Input capacitor at VINLDO1, VINLDO2/3 (1)
2.2
F
COUT1
Output capacitor at VLDO1 (1)
4.7
F
COUT2-3
Output capacitor at VLDO2-3 (1)
2.2
F
ILDO1
Output current at VLDO1
400
mA
(1)
See the Application Information section of this data sheet for more details.
2
Copyright 2007–2009, Texas Instruments Incorporated