参数资料
型号: TPS65101PWP
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 2.6 A SWITCHING REGULATOR, 2100 kHz SWITCHING FREQ-MAX, PDSO24
封装: GREEN, PLASTIC, HTSSOP-24
文件页数: 27/30页
文件大小: 1213K
代理商: TPS65101PWP
www.ti.com
SLVS496C – SEPTEMBER 2003 – REVISED APRIL 2006
DEVICE INFORMATION (continued)
Terminal Functions
TERMINAL
I/O
DESCRIPTION
NO.
NAME
(PWP)
(RGE)
VIN
4
7
I
Input voltage pin of the device
Enable pin of the device. This pin should be terminated and not be left floating. A logic
EN
24
3
I
high enables the device and a logic low shuts down the device.
COMP
22
1
Compensation pin for the main boost converter. A small capacitor is connected to this
pin.
Positive input terminal of the VCOM buffer. When the VCOM buffer is not used, this
VCOMIN
11
14
I
terminal can be connected to GND to reduce the overall quiescent current of the IC.
Enable pin of the linear regulator controller. This pin should be terminated and not be
ENR
23
2
I
left floating. Logic high enables the regulator and a logic low puts the regulator in
shutdown.
C1+
16
19
Positive terminal of the charge pump flying capacitor
C1-
17
20
Negative terminal of the charge pump flying capacitor
DRV
18
21
O
External charge pump driver
FB2
21
24
I
Feedback pin of negative charge pump
REF
20
23
O
Internal reference output typically 1.23 V
FB4
2
5
I
Feedback pin of the linear regulator controller. The linear regulator controller is set to
a fixed output voltage of 3.3 V or 3 V depending on the version.
BASE
3
6
O
Base drive output for the external transistor
GND
19
22
Ground
PGND
7, 8
10, 11
Power ground
VCOM
10
13
O
VCOM buffer output
FB3
12
15
I
Feedback pin of positive charge pump
OUT3
13
16
O
Positive charge pump output
Negative terminal of the charge pump flying capacitor and charge pump MODE pin. If
the flying capacitor is connected to this pin, the converter operates in a voltage tripler
C2-/MODE
15
18
mode. If the charge pump needs to operate in a voltage doubler mode, the flying
capacitor is removed and the C2-/MODE pin should be connected to GND.
Positive terminal for the charge pump flying capacitor. If the device runs in voltage
C2+
14
17
doubler mode, this pin should be left open.
Supply pin of the positive, negative charge pump, boost converter gate drive circuit,
and VCOM buffer. This pin should be connected to the output of the main boost
SUP
9
12
I
converter and cannot be connected to any other voltage source. For performance
reasons, it is not recommended for a bypass capacitor to be connected directly to this
pin.
FB1
1
4
I
Feedback pin of the boost converter
SW
5, 6
8, 9
I
Switch pin of the boost converter
PowerPAD/
The PowerPad or exposed thermal die needs to be connected to the power ground
Thermal Die
pins (PGND)
6
相关PDF资料
PDF描述
TPS65120RGTR 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
TPS65120RGTTG4 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
TPS65121RGT 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
TPS65120RGTRG4 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
TPS65121RGTR 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
相关代理商/技术参数
参数描述
TPS65101PWPG4 功能描述:LCD 驱动器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
TPS65101PWPR 功能描述:LCD 驱动器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
TPS65101PWPRG4 功能描述:LCD 驱动器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
TPS65101RGER 功能描述:LCD 驱动器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
TPS65101RGERG4 功能描述:LCD 驱动器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube