参数资料
型号: TPS65250RHAR
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 4 A SWITCHING REGULATOR, 2200 kHz SWITCHING FREQ-MAX, PQCC40
封装: 6 X 6 MM, GREEN, PLASTIC, MO-220VJJD-2, VQFN-40
文件页数: 9/38页
文件大小: 1782K
代理商: TPS65250RHAR
R
k
f
OSC(
) = 174
W
-1.122
www.ti.com
SLVSAA3B – JUNE 2010 – REVISED JANUARY 2011
Table 1. Storage and Release Circuit Advantages (continued)
FEATURE
ADVANTAGE
Using a resistor to set the peak current limit allows to choose the
Adjustable current limit
smallest possible inductor for a given load condition by setting the
current limit to match the saturation current of the inductor.
TPS65250 can be synchronized to a 1.1-MHz or 2.2-MHz external
Adjustable frequency and sync pin
clock. The Sync pin is blanked time equal to the PGOOD delay
plus 0.5 s to allow for external low clock setting.
In low power mode device takes less than 20 mW with a 12-V
Low power mode
input. If an step load > 100 mA is applied to any of the converters,
its output will switch to PWM mode.
Two LDOS rated 3.3 V, 10 mA and 6.5 V, 10 mA are available as
Always on LDOs
long as input supply is higher than UVLO threshold.
Integrated fets in all converters plus integrated driver circuits for
storage and release, minimize the real state required by power
Reduced footprint
stage. Selectable frequency allow to reduce size of inductor plus
input/output capacitors.
All rails are monitored and a Power Good signal is issued after an
Voltage supervisor and reset generator
adjustable time-out elapses.
DETAILED DESCRIPTION
Adjustable Switching Frequency
To select the internal switching frequency connect a resistor from ROSC to ground. Figure 30 shows the required
resistance for a given switching frequency.
Figure 30. ROSC vs Switching Frequency
(1)
For operation at 800 kHz a 230-k
resistor is required.
Synchronization
The status of the SYNC pin will be ignored during start-up and the TPS65250’s control will only synchronize to
an external signal after the PGOOD signal is asserted. The status of the SYNC pin will be ignored during start-up
and the TPS65250 will only synchronize to an external clock if the PGOOD signal is asserted. When
synchronization is applied, the PWM oscillator frequency must be lower than the sync pulse frequency to allow
the external signal trumping the oscillator pulse reliably. When synchronization is not applied, the SYNC pin
should be connected to ground.
Copyright 2010–2011, Texas Instruments Incorporated
17
Product Folder Link(s): TPS65250
相关PDF资料
PDF描述
TPSD336K020R0200 KONDENSATOR TANTAL SMD 33UF 20V
TPSD336K035R0300 KONDENSATOR TANTAL SMD 33UF 35V
TPSD476K016R0150 KONDENSATOR TANTAL SMD 47UF 16V
TPSD476K025R0250 KONDENSATOR TANTAL SMD 47UF 25V
TPSD686K016R0150 KONDENSATOR TANTAL SMD 68UF 16V
相关代理商/技术参数
参数描述
TPS65250RHAT 功能描述:PMIC 解决方案 PMU w/3 DC/DC Cnvrtr & Charge & Pump RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel
TPS652510EVM 功能描述:电源管理IC开发工具 TPS652510 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
TPS652510RHAR 功能描述:PMIC 解决方案 3 DC-DC Converters RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel
TPS652510RHAT 功能描述:PMIC 解决方案 3 DC-DC Converters RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel
TPS65251-1RHAT 功能描述:Buck Switching Regulator IC Positive Adjustable 0.8V 3 Output 3A, 2A 40-VFQFN Exposed Pad 制造商:texas instruments 系列:- 包装:剪切带(CT) 零件状态:有效 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:3 电压 - 输入(最小值):4.5V 电压 - 输入(最大值):18V 电压 - 输出(最小值/固定):0.8V 电压 - 输出(最大值):17V 电流 - 输出:3A,2A 频率 - 开关:300kHz ~ 2.2MHz 同步整流器:是 工作温度:-40°C ~ 125°C (TJ) 安装类型:表面贴装 封装/外壳:40-VFQFN 裸露焊盘 供应商器件封装:40-VQFN(6x6) 标准包装:1