参数资料
| 型号： | TPS75315QPWPREP |
| 厂商： | Texas Instruments |
| 文件页数： | 16/33页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 1.5V 1.5A 20HTSSOP |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 1.5V |
| 输入电压： | 2.7 V ~ 5 V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 1.5A（最小值） |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 20-HTSSOP |
| 包装： | 标准包装 |
| 其它名称： | 296-22506-6 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
TPS75101 EP, '75115 EP, '75118 EP, '75125 EP, '75133 EP WITH POWER GOOD
TPS75301 EP, TPS75315 EP, TPS75318 EP, TPS75325 EP, TPS75333 EP WITH RESET
FAST TRANSIENT RESPONSE 1.5 A LOW DROPOUT VOLTAGE REGULATORS
SGLS158 ? APRIL 2003
APPLICATION INFORMATION
output capacitor
As with most LDO regulators, the TPS751xxQ and TPS753xxQ require an output capacitor connected between
OUT and GND to stabilize the internal control loop. The minimum recommended capacitance value is 47 μ F and
the ESR (equivalent series resistance) must be between 100 m ? and 10 ? . Solid tantalum electrolytic, aluminum
electrolytic, and multilayer ceramic capacitors are all suitable, provided they meet the requirements described in
this section. Larger capacitors provide a wider range of stability and better load transient response.
This information, along with the ESR graphs, is included to assist in selection of suitable capacitance for the user’s
application. When necessary to achieve low height requirements along with high output current and/or high load
capacitance, several higher ESR capacitors can be used in parallel to meet these guidelines.
ESR and transient response
LDOs typically require an external output capacitor for stability. In fast transient response applications, capacitors
are used to support the load current while LDO amplifier is responding. In most applications, one capacitor is used
to support both functions.
Besides its capacitance, every capacitor also contains parasitic impedances. These parasitic impedances are
resistive as well as inductive. The resistive impedance is called equivalent series resistance (ESR), and the
inductive impedance is called equivalent series inductance (ESL). The equivalent schematic diagram of any
capacitor can therefore be drawn as shown in Figure 21.
R ESR
L ESL
C
Figure 21. ? ESR and ESL
16
POST OFFICE BOX 655303
? DALLAS, TEXAS 75265
相关PDF资料 |
PDF描述 |
|---|---|
| TPS75301QPWPREP | IC REG LDO ADJ 1.5A 20HTSSOP |
| NCP4671DSN12T1G | IC REG LDO 1.2V .4A SOT-23-5 |
| ESC28DRTS-S734 | CONN EDGECARD 56POS DIP .100 SLD |
| ACC15DRTI-S734 | CONN EDGECARD 30POS DIP .100 SLD |
| HMC18DRYN-S13 | CONN EDGECARD 36POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS75315QPWPRG4 | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 1.5-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75315QPWPRQ1 | 功能描述:低压差稳压器 - LDO Fast-Trans-Resp 1.5A LDO Vltg Reg RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75318QPWP | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 1.5-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75318QPWPG4 | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 1.5-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75318QPWPR | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 1.5-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。