- 您现在的位置：买卖IC网 > PDF目录69538 > TXS75ZA-NP2R (POWER-ONE INC) 1-OUTPUT 112 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | TXS75ZA-NP2R |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 112 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | 2.400 X 3.450 INCH, 0.500 INCH HEIGHT, 3/4 BRICK PACKAGE-14 |
| 文件页数： | 19/27页 |
| 文件大小： | 2635K |
| 代理商： | TXS75ZA-NP2R |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页
Product Specification
TXS Series: 75…120 A DC-DC Converters
36 to 75 V DC Input, 1.2, 1.5, 1.8, 2.0 and 2.5 V Output, 90 W to 250 W
REV. FEB 18, 2003
26 of 27
www.power-one.com
Layout Considerations
The layout for a TXS module has to be done
carefully to minimise EMI effects and to avoid
current crowding on the motherboard.
The application note “TXS layout considerations”
on the TXS product CD ROM gives some general
rules how to achieve a good layout. It explains how
to work with 100A currents, how EMI is avoided,
how signal wires should be routed and how the
module should be positioned. It gives safety advice
and describes the advantages of Bus Bars.
Screw fixing
To relieve the solder connections from mechanical
stress, it is recommended that the modules be
screwed to the motherboard. This is especially
important, if an external heatsink is used.
P1 standard Heat Sink
Thermal
interface material
Telecom
motherboard
Spring washer
0.5’ =12.7mm
Alu base-plate
of TXS
d Print +/- Tol
M3
Screw
Figure 56:
Screw fixing of the TXS converter
Care should be taken when selecting the screw
lengths to mount the TXS on the motherboard and
the heatsink on the TXS. The available thread
length in the TXS case and the tolerances of the
screws and the board should be considered.
The minimum insertion depth of the screw in the
material should be 4.5 mm. It is recommend to use
spring washers to compensate for changes in the
motherboard
thickness
due
to
ageing
and
temperature variations.
相关PDF资料 |
PDF描述 |
|---|---|
| TXS75ZA-R3H | 1-OUTPUT 112 W DC-DC REG PWR SUPPLY MODULE |
| TXS75ZB-R3V | 1-OUTPUT 135 W DC-DC REG PWR SUPPLY MODULE |
| TXS80ZC-N3V | 1-OUTPUT 160 W DC-DC REG PWR SUPPLY MODULE |
| TXS80ZC-P2 | 1-OUTPUT 160 W DC-DC REG PWR SUPPLY MODULE |
| TXS80ZD-N2V | 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TXS75ZB | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Input voltage range 36ˇ75V DC Single 80ˇ100A output 1500V DC I/O electrical strength test voltage |
| TXS75ZY | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Input voltage range 36ˇ75V DC Single 80ˇ100A output 1500V DC I/O electrical strength test voltage |
| TXS80ZC | 制造商:Power-One 功能描述: |
| TXS80ZD | 制造商:Power-One 功能描述: |
| TXS-86-515-S | 制造商:FLOYD BELL 功能描述:Alarm, Piezoelectric, 92 dBA to 103 dBA @ 2 Ft., Extra Loud Siren, 5-15VDC |
发布紧急采购，3分钟左右您将得到回复。