收藏本站
参数资料
型号： UPD78F9511GR-JJG-A
厂商： Renesas Electronics America
文件页数： 172/175页
文件大小： 0K
描述： MCU 8BIT SGL CHIP 16PIN
标准包装： 400
系列： 78K0S/Kx1+
核心处理器： 78K0S
芯体尺寸： 8-位
速度： 10MHz
外围设备： LVD，POR，PWM，WDT
输入/输出数： 13
程序存储器容量： 2KB（2K x 8）
程序存储器类型： 闪存
RAM 容量： 128 x 8
电压 - 电源 (Vcc/Vdd)： 2 V ~ 5.5 V
振荡器型： 内部
工作温度： -40°C ~ 85°C
封装/外壳： 16-SSOP（0.173"，4.40mm 宽）
包装： 托盘
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
User’s Manual U16994EJ6V0UD
94
(3) 16-bit timer capture/compare register 010 (CR010)
CR010 is a 16-bit register which has the functions of both a capture register and a compare register. Whether
it is used as a capture register or a compare register is set by bit 2 (CRC002) of capture/compare control
register 00 (CRC00).
CR010 is set by 16-bit memory manipulation instruction.
Reset signal generation clears CR010 to 0000H.
Figure 6-4. Format of 16-bit Timer Capture/Compare Register 010 (CR010)
CR010
Symbol
FF17H
FF16H
Address: FF16H, FF17H
After reset: 0000H
R/W
76543210
When CR010 is used as a compare register
The value set in CR010 is constantly compared with the 16-bit timer counter 00 (TM00) count value, and an
interrupt request (INTTM010) is generated if they match.
When CR010 is used as a capture register
It is possible to select the valid edge of the TI000 pin as the capture trigger. The TI000 valid edge is set by
means of prescaler mode register 00 (PRM00) (refer to Table 6-3).
Table 6-3. CR010 Capture Trigger and Valid Edge of TI000 Pin (CRC002 = 1)
CR010 Capture Trigger
TI000 Pin Valid Edge
ES010
ES000
Falling edge
0
Rising edge
0
1
Both rising and falling edges
1
Remarks 1. Setting ES010, ES000 = 1, 0 is prohibited.
2. ES010, ES000: Bits 5 and 4 of prescaler mode register 00 (PRM00)
CRC002:
Bit 2 of capture/compare control register 00 (CRC00)
Cautions 1. In the free-running mode and in the clear & start mode using the valid edge of the TI000
pin, if CR010 is set to 0000H, an interrupt request (INTTM010) is generated when CR010
changes from 0000H to 0001H after an overflow (FFFFH).
2. If the new value of CR010 is less than the value of 16-bit timer counter 00 (TM00), TM00
continues counting, overflows, and then starts counting from 0 again. If the new value of
CR010 is less than the old value, therefore, the timer must be reset to be restarted after
the value of CR010 is changed.
3. The value of CR010 after 16-bit timer/event counter 00 has stopped is not guaranteed.
4. The capture operation may not be performed for CR010 set in compare mode even if a
capture trigger is input.
5. If the register read period and the input of the capture trigger conflict when CR010 is
used as a capture register, the capture trigger input takes precedence and the read data
is undefined. Also, if the timer count stop and the input of the capture trigger conflict,
the capture data is undefined.
相关PDF资料
PDF描述
MC74HC4852ANG IC MUX/DEMUX DUAL 4X1 16DIP
MC74HC4851ANG IC MUX/DEMUX 8X1 16DIP
NLAS5123MNR2G IC SWITCH SPDT 6WDFN
PI3V312QE IC VIDEO MUX/DEMUX 2X1 16QSOP
ISL54409IRUZ-T IC SW USB/AUDIO DUAL SPT 10UTQFN
相关代理商/技术参数
参数描述
UPD78F9512GR-JJG-A 功能描述:MCU 8BIT SGL CHIP 16PIN RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:78K0S/Kx1+ 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA，UART/USART 外围设备:欠压检测/复位，LED，POR，PWM，WDT 输入/输出数:16 程序存储器容量:4KB（4K x 8） 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
UPD78F9801GB-8ES-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9842GB-8ES 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9842GB-8ES-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9850AMC(A)-5A4-A 制造商:Renesas Electronics Corporation 功能描述:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*