参数资料
型号: UPSD3213B-40T6T
厂商: 意法半导体
英文描述: Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
中文描述: 闪存可编程系统设备与8032微控制器核心和64Kbit SRAM的
文件页数: 46/176页
文件大小: 1081K
代理商: UPSD3213B-40T6T
μ
PSD323X
46/176
I/O PORTS (MCU MODULE)
The MCU Module has five ports: Port0, Port1,
Port2, Port3 and Port 4. (Refer to the PSD Module
section on I/O ports A,B,C and D). Ports P0 and
P2 are dedicated forthe externaladdress and data
bus and is not available in the 80 pin package de-
vices.
Port1 -Port3 are thesame as in the standard8032
micro-controllers, with the exception of the addi-
tional special peripheral functions. All ports are bi-
directional. Pinsof which the alternative function is
not usedmay be used as normal bi-directional I/O.
The use of Port1- Port4 pins as alternative func-
tions
are
carried
out
μ
PSD323X Devices provided the associated SFR
Bit is set HIGH.
The following SFR registers (Tables 29, 30, and
31) are used to control the mapping of alternate
automatically
by
the
functions onto the I/O port bits. Port 1 alternate
functions are controlled using the P1SFS register,
except for Timer 2 and the 2nd UART which are
enabled by their configuration registers. P1.0 to
P1.3 are default to GPIO after reset.
Port 3 pins 6 and 7 have been modified from the
standard 8032. These pins that were used for
READ and WRITE control signals are now GPIO
or I
2
C bus pins. The READ and WRITE pins are
assigned to dedicated pins.
Port 3 and Port 4 alternate functions are controlled
using the P3SFS and P4SFS SpecialFunction Se-
lection registers. After a reset, the I/O pins default
to GPIO. The alternate function is enabled if the
corresponding bit in the PXSFS register is set to
’1.’
Table 28. I/O Port Functions
Table 29. P1SFS (91H)
Table 30. P3SFS (93H)
Table 31. P4SFS (94H)
Port Name
Main Function
Alternate
Port 1
GPIO
Timer 2 - Bits 0,1
2nd UART - Bits 2,3
ADC - Bits 4..7
Port 3
GPIO
UART - Bits 0,1
Interrupt - Bits 2,3
Timers - Bits 4,5
I
2
C - Bits 6,7
Port 4
GPIO
DDC - Bits 0..2
PWM - Bits 3..7
USB +/-
USB +/- Only
7
6
5
4
3
2
1
0
0=Port 1.7
1=ACH3
0=Port 1.6
1=ACH2
0=Port 1.5
1=ACH1
0=Port 1.4
1=ACH0
Bits Reserved
Bits Reserved
7
6
5
4
3
2
1
0
0 = Port 1.7
1 = SCL
from I
2
C unit
0 = Port 1.6
1 = SDA
from I
2
C unit
Bits are reserved.
7
6
5
4
3
2
1
0
0=Port 4.7
1=PWM 4
0=Port 4.6
1=PWM 3
0=Port 4.5
1=PWM 2
0=Port 4.4
1=PWM 1
0=Port 4.3
1=PWM 0
0=Port 4.2
1=V
SYNC
0=Port 4.1
1=DDC -
SCL
0=Port 4.0
1=DDC -
SDA
相关PDF资料
PDF描述
UPSD3213B-40U1T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3213BV-40U6T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3214A-40U1T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3214A-40U6T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3214AV-24T1T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
相关代理商/技术参数
参数描述
UPSD3213B-40U1 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core
UPSD3213B-40U1T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3213B-40U6 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core
UPSD3213B-40U6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core
UPSD3213BV-24T1 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core