参数资料
型号: UPSD3233AV-24T1T
厂商: 意法半导体
英文描述: Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
中文描述: 闪存可编程系统设备与8032微控制器核心和64Kbit SRAM的
文件页数: 90/176页
文件大小: 1081K
代理商: UPSD3233AV-24T1T
μ
PSD323X
90/176
USB HARDWARE
The characteristics of USB hardware are as fol-
lows:
I
Complies with the Universal Serial Bus
specification Rev. 1.1
I
Integrated SIE (Serial Interface Engine), FIFO
memory and transceiver
I
Low speed (1.5Mbit/s) device capability
I
Supports control endpoint0 and interrupt
endpoint1 and 2
I
USB clock input must be 6MHz (requires MCU
clock frequency to be 12, 24, or 36MHz).
The analog front-end is an on-chip generic USB
transceiver. It is designed to allow voltage levels
equal to V
DD
from the standard logic to interface
with thephysical layerof the Universal Serial Bus.
It is capable of receiving and transmitting serial
data at low speed (1.5Mb/s).
The SIE is the digital-front-end of the USB block.
This module recovers the 1.5MHz clock, detects
the USB sync word and handles all low-level USB
protocols and error checking. The bit-clock recov-
ery circuit recovers the clock from the incoming
USB data stream and is able to track jitter and fre-
quency drift according to the USB specification.
The SIE also translates the electrical USB signals
into bytes or signals. Depending upon the device
USB address and theUSB endpoint.
Address, the USB data is directed to the correct
endpoint on SIE interface. The data transfer of this
H/W could be of type control or interrupt.
The device’s USB address and the enabling of the
endpoints are programmable in the SIEconfigura-
tion header.
USB related registers
The USB block is controlled via seven registers in
the memory: (UADR, UCON0, UCON1, UCON2,
UISTA, UIEN, and USTA).
Three memory locations on chip which communi-
cate the USB block are:
I
USB endpoint0 data transmit register (UDT0)
I
USB endpoint0 data receive register (UDR0)
I
USB endpoint1 data transmit register (UDT1)
Table 63. USB Address Register (UADR: 0EEh)
Table 64. Description of the UADR Bits
7
6
5
4
3
2
1
0
USBEN
UADD6
UADD5
UADD4
UADD3
UADD2
UADD1
UADD0
Bit
Symbol
R/W
Function
7
USBEN
R/W
USB Function Enable Bit.
When USBEN is clear, the USB module will not respond to any tokens
from host.
RESET clears this bit.
6 to 0
UADD6 to
UADD0
R/W
Specify the USB address of the device.
RESET clears these bits.
相关PDF资料
PDF描述
UPSD3233AV-24T6T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3233BV-40T1T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3233BV-40U6T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3234AV-40U6T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
UPSD3213B-24U1T Flash Programmable System Devices with 8032 Microcontroller Core and 64Kbit SRAM
相关代理商/技术参数
参数描述
UPSD3233AV-24T6 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core
UPSD3233AV-24T6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Devices with 8032 Microcontroller Core
UPSD3233AV-24U1 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core
UPSD3233AV-24U1T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Devices with 8032 Microcontroller Core
UPSD3233AV-24U6 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Flash Programmable System Device with 8032 Microcontroller Core