参数资料
型号: WJLXT972ALC.A4SE000
厂商: CORTINA SYSTEMS INC
元件分类: 网络接口
英文描述: DATACOM, ETHERNET TRANSCEIVER, PQFP64
封装: LEAD FREE, LQFP-64
文件页数: 91/100页
文件大小: 1046K
代理商: WJLXT972ALC.A4SE000
16
Intel LXT971A, LXT972A, and LXT972M Transceivers Specification Update
Document Number: 249354
Revision Number: 010
Revision Date: January 13, 2005
Errata
1.
Incorrect Auto-Negotiation Link Partner Base Page Ability Register
Problem:
Upon completing the parallel detection function, the Auto-Negotiation Link Partner Base Page
Ability Register (Register 5) should be updated to reflect the link partner’s capability. Register 5 is
not updated correctly and always reads 0000h.
Workaround:
The Status Register #2 (Register 17) is properly updated with the arbitrated link status information
and can be used to identify link speed and duplex status.
Status:
This erratum has been previously fixed.
2.
Incorrect Auto-Negotiation Next Page
Problem:
The Auto-Negotiation Next Page state machine functions incorrectly and does not support Next
Page operations.
Workaround:
Bit 4.15 in the Auto-Negotiation Advertisement Register must be set to 0 (port has no ability to
send multiple pages).
Status:
This erratum has been previously fixed.
3.
Incorrect Remote Fault
Problem:
In fiber mode, the Remote Fault bit (Register bit 1.4) in MII Status Register #1 is used to report
receipt of the Far End Fault Indication (FEFI) code to the MAC. The Remote Fault bit fails to
indicate receipt of the FEFI code under certain conditions.
This occurs only when the following conditions are true:
The device is operating in fiber mode, AND
The device hardware configuration is set to enable auto-negotiation.
Workaround:
Strap the LED/CFG1 pin to ground to disable auto-negotiation.
Status:
This erratum has been previously fixed.
相关PDF资料
PDF描述
WJLXT972ALC.A4SE001 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT972ALC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT972ALC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT972MLC.A4-864101 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WJLXT972MLC.A4-864115 DATACOM, ETHERNET TRANSCEIVER, PQFP48
相关代理商/技术参数
参数描述
WJLXT972MLC.A4 功能描述:IC TRANS 3.3V ETHERNET 48-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 供应商设备封装:16-PDIP 包装:管件
WJLXT972MLC.A4 S L7U9 制造商:Intel 功能描述:PHY 1-CH 10Mbps/100Mbps 64-Pin LQFP
WJLXT972MLC.A4-864115 功能描述:TXRX ETH 10/100 SGL PORT 48-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)
WJLXT972MLCA4 制造商:Cortina Systems Inc 功能描述:
WJM1000 功能描述:射频模块 902-928 MHz US ISM EPC Class 1 Gen 2 RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm