- 您现在的位置：买卖IC网 > Datasheet目录591 > 1213563-1 (TE Connectivity)TOOL DAHT ADAPTER ASSEMBLY Datasheet资料下载
参数资料
| 型号： | 1213563-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | TOOL DAHT ADAPTER ASSEMBLY |
| 标准包装： | 1 |
| 附件类型： | 压接适配器 |
| 适用于相关产品： | * |
| 配用： | 1-49935-0-ND - TOOL HEAD CRIMP 22-10AWG SOLIS 1-46673-0-ND - TOOL HEAD CRIMP 22-16AWG STRATO 1-47387-0-ND - TOOL HEAD CRIMP 16-14AWG PIDG |
Double Action Hand Tool (DAHT)
Adapter Assembly 1213563- 1
(For Use With 626 Pneumatic Tooling Assemblies)
Instruction Sheet
408-- 4485
17 MAR 10 Rev B
Typical DAHT
Crimp Head (Ref)
Adapter Cavity
Adapter Assembly
Clevis
Mounting Holes
Clevis
Figure 1
Setscrew
Adapter
Cam
Quick Pins
(Supplied with
Adapter Assembly)
i
1. INTRODUCTION
DAHT Adapter Assembly 1213563--1 is designed to
accept the crimp head from any DAHT to adapt the
crimp head for use with 626 pneumatic tooling
assemblies. DAHTs are available from Tyco
Electronics. For information concerning the setup and
operation of the pneumatic tool, refer to Customer
Manual 409--5862.
This instruction sheet provides:
— recommended procedures for crimp head
removal from the hand tool
— crimp head installation into the adapter
— installation and removal of the cam and adapter
from the pneumatic tool
— maintenance, inspection, and repair information
for the adapter
For wire preparation and crimping procedure, and
crimp head maintenance, inspection, and repair, refer
to the associated instruction sheet.
Read these instructions thoroughly before
proceeding.
NOTE Dimensions are in millimeters [with inch
equivalents in brackets]. Figures and illustrations
are for identification only and are not drawn to
scale.
Reasons for reissue of this instruction sheet are
provided in Section 6, REVISION SUMMARY.
2. DESCRIPTION
The adapter assembly facilitates the connection of the
crimp head (typical shown in Figure 1) to the
pneumatic tool and provides the necessary motion of
the crimp head jaws when the pneumatic tool is
actuated. When the tool is actuated, the cam extends
into the adapter, contacting the crimp head jaws.
When the cam retracts, the force is removed from the
jaws and they return to their starting position.
The jaws may be opened and closed manually by
simultaneously squeezing the two opposing clevises,
which are coupled to the jaws. The quick pins secure
the crimp head to the adapter.
E 2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 5
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 1213670-1 | TOOL SEATING ASSY FOR STACK RJ45 |
| 1213783-1 | TOOL HAND CRIMP 16-26AWG |
| 1213860-1 | CERTI-CRIMP II ADAPT-SDE BENCH |
| 1214518-2 | TOOL EXTRACTION FOR AMPLIVAR |
| 1214695-1 | TOOL CRIMPER ASSY BACKSHELL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1213564-1 | 功能描述:手工工具 ADAPTER RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1213565-1 | 制造商:TE Connectivity 功能描述:CLEVIS - Bulk |
| 1213566-1 | 制造商:TE Connectivity 功能描述:CLEVIS 制造商:TE Connectivity 功能描述:CLEVIS - Bulk |
| 1213573-1 | 制造商:TE Connectivity 功能描述:BLADE, GUIDE - Bulk |
| 1-213574-1 | 功能描述:管脚和插座连接器 BLADE SHEAR UPPER W/BDLK LF RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
发布紧急采购，3分钟左右您将得到回复。