- 您现在的位置：买卖IC网 > Datasheet目录593 > 1320369-1 (TE Connectivity)TOOL CRIMPING HEAD 8AWG COPALUM Datasheet资料下载
参数资料
| 型号： | 1320369-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/10页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMPING HEAD 8AWG COPALUM |
| 标准包装： | 1 |
| 压接或电缆尺寸： | 8 AWG |
| 压接手柄： | 189721-2，189722-2 |
| 连接器类型： | 端子及连接件 |
Pneumatic Crimping Heads 662546- 1 and 1320369- 1
6. CRIMP INSPECTION
Inspect crimped terminals and splices by checking the
features described in Figure 4. Use only terminals
and splices that meet the conditions shown in the
“ACCEPT” column. “REJECT” terminations can be
avoided through careful use of instructions in
Sections 4 and 5, and by performing regular crimping
head maintenance as described in Section 7.
7. MAINTENANCE AND INSPECTION
DANGER To avoid personal injury, ALWAYS disconnect air
supply from pneumatic tool before performing
maintenance or inspection.
It is recommended that a maintenance and inspection
program be performed periodically to ensure
dependable and uniform terminations. The pneumatic
crimping head should be inspected once a month.
Frequency of inspection should be adjusted to suit
your requirements through experience. Frequency of
inspection depends on:
1. The care, amount of use, and handling of the
crimping head.
2. The type and size of the product crimped.
3. The degree of operator skill.
4. The presence of abnormal amounts of dust and
dirt.
5. Your own established standards.
408- 4366
3. Make certain all surfaces are protected with a
thin coat of any good SAE 20 motor oil. Do NOT oil
excessively.
4. When the crimping head is not in use, store it in
a clean, dry area.
7.2. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the crimping head or be supplied
to supervisory personnel responsible for the crimping
head. Though recommendations call for at least one
inspection a month, the frequency should be based
on amount of use, working conditions, operator
training and skill, and your established company
policies. These inspections should include a visual
inspection (Paragraph 7.3) and a crimping chamber
inspection (Paragraph 7.5).
7.3. Visual Inspection
1. Remove all lubrication and accumulated film by
immersing the crimping head in a suitable
commercial degreaser that will not affect paint or
plastic.
2. Make certain all components are in place. If
replacements are necessary, refer to Section 8,
REPLACEMENT AND REPAIR.
3. Check all bearing surfaces for wear. Make sure
the rollers turn freely with minimal resistance.
Replace worn parts.
4. Inspect crimp area for flattened, chipped, or
broken areas. See Figure 5. Replace worn or
damaged parts.
Each crimping head is thoroughly inspected before
packaging. Since there is the possibility of damage
during shipment, new crimping heads should be
inspected immediately upon arrival at your facility.
7.1. Daily Maintenance
It is recommended that each operator be responsible
for the following steps of daily maintenance:
1. Remove dust, moisture, and other contaminants
with a clean, soft brush, or a lint--free cloth. Do
NOT use objects that could damage the head.
2. Make sure that all pins, rings, and other
components are in place and secure.
Chipped Edge
Flattened
Area
Pitted
Broken
Corner
DANGER
4 of 10
To avoid personal injury and damage to the
crimping head, make sure quick pins are fully
tightened.
Tyco Electronics Corporation
Figure 4
Rev C
相关PDF资料 |
PDF描述 |
|---|---|
| 1320447-1 | TOOL DIE ASSY 2AWG BREAKAWAY |
| 1338273-1 | TOOL DIE ASSY 22-16AWG SOLIS |
| 1366402-1 | TOOL HAND 18-22AWG STR ACTION |
| 1366865-1 | EXT-TOOL FOR 025 TAB CONTACT |
| 1372039-1 | TOOL HAND MONO SHAPE MK II |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 132036-HMC858LC4B | 制造商:Hittite Microwave Corp 功能描述:BOARD EVAL FOR HMC858LC4B |
| 132038 | 制造商:Brady Corporation 功能描述:B302 POLYESTER BLK,RED/WHT 10X14 |
| 1320383-1 | 功能描述:手工工具 BODY, TUBE RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1320384-1 | 功能描述:手工工具 TUBE BOTTOM RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 132039 | 制造商:Brady Corporation 功能描述:B120 FIBERGLASS BLK,RED/WHT 7X10 |
发布紧急采购，3分钟左右您将得到回复。