- 您现在的位置：买卖IC网 > Datasheet目录593 > 1320369-1 (TE Connectivity)TOOL CRIMPING HEAD 8AWG COPALUM Datasheet资料下载
参数资料
| 型号： | 1320369-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 7/10页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMPING HEAD 8AWG COPALUM |
| 标准包装： | 1 |
| 压接或电缆尺寸： | 8 AWG |
| 压接手柄： | 189721-2，189722-2 |
| 连接器类型： | 端子及连接件 |
Pneumatic Crimping Heads 662546- 1 and 1320369- 1
4. Align the NO--GO element with the inner
crimping section. Push element straight into the
crimping chamber without using force. The
NO--GO element must pass completely through
the crimping chamber and then must not rotate.
See Figure 7, Detail A.
5. Open the crimping jaws. Position the GO
element on the lower jaw in the right outer crimping
section so that the locator is in the notch of the
element. Close the crimping jaws so that the lower
jaw surface of the crimping chamber is seated on
the element. The GO element must pass
completely through the crimping chamber and then
rotate freely in either direction. See Figure 7,
Detail B.
6. Position the NO--GO element on the lower jaw
in the right outer crimping section so that the
locator is in the notch of the element. Close the
crimping jaws so that the lower jaw surface of the
crimping chamber is seated on the element. The
NO--GO element must pass completely through
the crimping chamber and then must not rotate.
See Figure 7, Detail B.
7. Repeat Steps 5 and 6 for the left outer crimping
section.
If the crimping chamber passes the gage inspection,
the crimping head is considered dimensionally correct
and should be lubricated with a THIN coat of any
408- 4366
good SAE 20 motor oil. If the crimping chamber does
not conform to the plug gage conditions, contact your
local Field Representative or refer to Section 8.
For additional information about the use of a plug
gage, see instruction sheet 408--7424.
8. REPLACEMENT AND REPAIR
Replacement parts and recommended spares are
listed in Figure 8. The recommended spares should
be stocked for immediate replacement.
Order replacement parts through your representative,
or call 1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105--3608
For repair service, please contact a representative at
1--800--526--5136.
9. REVISION SUMMARY
Since the previous release of this document, the
following changes have been made:
S Added “Original Instructions;”
S Applied the TE logo.
Rev C
Tyco Electronics Corporation
7 of 10
相关PDF资料 |
PDF描述 |
|---|---|
| 1320447-1 | TOOL DIE ASSY 2AWG BREAKAWAY |
| 1338273-1 | TOOL DIE ASSY 22-16AWG SOLIS |
| 1366402-1 | TOOL HAND 18-22AWG STR ACTION |
| 1366865-1 | EXT-TOOL FOR 025 TAB CONTACT |
| 1372039-1 | TOOL HAND MONO SHAPE MK II |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 132036-HMC858LC4B | 制造商:Hittite Microwave Corp 功能描述:BOARD EVAL FOR HMC858LC4B |
| 132038 | 制造商:Brady Corporation 功能描述:B302 POLYESTER BLK,RED/WHT 10X14 |
| 1320383-1 | 功能描述:手工工具 BODY, TUBE RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1320384-1 | 功能描述:手工工具 TUBE BOTTOM RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 132039 | 制造商:Brady Corporation 功能描述:B120 FIBERGLASS BLK,RED/WHT 7X10 |
发布紧急采购，3分钟左右您将得到回复。