- 您现在的位置：买卖IC网 > Datasheet目录593 > 1320369-1 (TE Connectivity)TOOL CRIMPING HEAD 8AWG COPALUM Datasheet资料下载
参数资料
| 型号： | 1320369-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 6/10页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMPING HEAD 8AWG COPALUM |
| 标准包装： | 1 |
| 压接或电缆尺寸： | 8 AWG |
| 压接手柄： | 189721-2，189722-2 |
| 连接器类型： | 端子及连接件 |
Pneumatic Crimping Heads 662546- 1 and 1320369- 1
7.4. Lubrication
Lubricate all pins, pivot points, and bearing surfaces
with a high quality grease. A recommendation is
Molykote } grease, which is a commercially available
lubricant. Lubricate according to the following
schedule:
S Head used in daily production -- lubricate daily
S Head used daily (occasional) -- lubricate weekly
S Head used weekly -- lubricate monthly
Wipe excess grease from crimping head, particularly
from jaw closure areas. Grease transferred from jaw
closure area onto certain terminations may affect the
electrical characteristics of an application.
7.5. Gaging the Crimping Chamber
This inspection requires the use of plug gages
408- 4366
conforming to the dimensions shown in Figure 6.
Tyco does not manufacture or market these gages.
DANGER Disconnect air supply and remove crimping head
from pneumatic tool before inspecting crimping
chamber.
1. Remove oil and dirt from the bottom of the jaw
surfaces and plug gage element surfaces.
2. Close crimping jaws until they are bottomed, but
not under pressure.
3. Align the GO element with the inner crimping
section. Push element straight into the crimping
chamber without using force. The GO element
must pass completely through the crimping
chamber and then rotate freely in either direction.
See Figure 7, Detail A.
Suggested Plug Gage Design for Inner Crimping Section
GO
NO-- GO
1 /
A
2 A
Jaw Closure
Configuration
50.8 mm
[2.00 in.]
C
B
D
CRIMPING
HEAD
GO
GAGE ELEMENT DIMENSIONS (mm [IN.])
NO-- GO “A” “B”
“C”
“D”
662546--1
1320369--1
2.997--3.005
[.1180--.1183]
3.249--3.251
[.1279--.1280]
1.65
[.065]
7.37
[.290]
7.87
[.310]
.610
[.024]
Suggested Plug Gage Design for Outer Crimping Section
GO
NO-- GO
1 /
A
2 A
Jaw Closure
Configuration
50.8 mm
[2.00 in.]
C
B
D
CRIMPING
HEAD
GO
GAGE ELEMENT DIMENSIONS (mm [IN.])
NO-- GO “A” “B”
“C”
“D”
662546--1
1320369--1
4.445--4.453
[.1750--.1753]
4.798--4.801
[.1889--1890]
2.29
[.090]
3.30
[.130]
7.87
[.310]
1.14
[.045]
Figure 6
} Trademark of Dow Corning Corporation
6 of 10
Tyco Electronics Corporation
Rev C
相关PDF资料 |
PDF描述 |
|---|---|
| 1320447-1 | TOOL DIE ASSY 2AWG BREAKAWAY |
| 1338273-1 | TOOL DIE ASSY 22-16AWG SOLIS |
| 1366402-1 | TOOL HAND 18-22AWG STR ACTION |
| 1366865-1 | EXT-TOOL FOR 025 TAB CONTACT |
| 1372039-1 | TOOL HAND MONO SHAPE MK II |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 132036-HMC858LC4B | 制造商:Hittite Microwave Corp 功能描述:BOARD EVAL FOR HMC858LC4B |
| 132038 | 制造商:Brady Corporation 功能描述:B302 POLYESTER BLK,RED/WHT 10X14 |
| 1320383-1 | 功能描述:手工工具 BODY, TUBE RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1320384-1 | 功能描述:手工工具 TUBE BOTTOM RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 132039 | 制造商:Brady Corporation 功能描述:B120 FIBERGLASS BLK,RED/WHT 7X10 |
发布紧急采购，3分钟左右您将得到回复。