参数资料
型号: 172807-1
厂商: TE Connectivity
文件页数: 10/12页
文件大小: 0K
描述: CONN HOUSING 2POS MINI UN M-N-L
RoHS指令信息: 172807-1 Statement of Compliance
3D 型号: 172807-1.pdf
标准包装: 1,000
系列: 迷你通用 MATE-N-LOK
连接器类型: 自配接
触点类型:: 公形或母形
位置数: 2
间距: 0.323"(8.20mm)
行数: 1
安装类型: 自由悬挂
触点终端: 压接
紧固型: 销锁
颜色: 自然色
包装: 散装
请注意: 不提供触点
相关产品: A100437CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100438CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN
A100438TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100437TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL
1-770988-1-ND - CONTACT SKT 18-22AWG MINI-UMNL
A100430TR-ND - CONTACT SKT 18-22AWG MINI-UMNL
1-770903-1-ND - CONTACT PIN 18-22AWG MINI-UMNL
A100429TR-ND - CONTACT SKT 22-26AWG MINI-UMNL
更多...
114-- 16017
SOLDERING PROCESS
MAXIMUM WAVE TEMPERATURE
CELSIUS FAHRENHEIT
TIME
(At Max Temperature)
Wave Soldering
260
500
5 Seconds
Figure 8
3.7. Mating and Unmating
A. Polarization
The connectors (excluding hermaphroditic) are fully polarized (ribs and slots) to provide proper mating
using a positive locking mechanism to prevent accidental disengagement of mated connectors.
B. Keying
Keying plugs provide additional polarization for mating connectors. The keying plug may be inserted into
the FRONT of the plug housing or cap housing.
C. Engagement
The mating connectors must have an identical number of circuit positions. Polarizing features must be
properly oriented. The connectors must be inserted straight toward each other until they bottom and the
positive locking latch and locking tab engage.
D. Disengagement
For panel--mounted and free--hanging connectors, the lock on the plug housing must be pinched and the
plug housing must be pulled straight out.
3.8. Strain Relief and Wire Dress
If required, wires can be bundled together and supported with cable ties. Wires must not be stretched or
confined in any way that would restrict the floating action of the contacts. Therefore, the wires must remain
perpendicular to the connector and avoid an excessively sharp bend radius. The minimum distance for the
cable tie, measured from the wire end of the connector to the cable tie, must be 76.2 [3.00].
3.9. Replacement and Repair
Damaged, worn, or improperly crimped contacts and damaged connectors must not be used. Such
components should be removed, discarded, and replaced with new components.
4. QUALIFICATION
Mini--Universal MATE--N--LOK connectors are Recognized by Underwriters Laboratories Inc. (UL) under File
E28476 and Certified by CSA International under File LR 7189.
5. TOOLING
Tooling for crimping, inserting, and extracting contacts is given in Figure 9.
5.1. Crimping Contacts
Strip--form contacts are designed to be crimped with a miniature applicator installed in a semi--automatic or
automatic machine. Loose--piece contacts are designed to be crimped with a hand crimping tool.
NOTE
i
AMP--O--LECTRIC Model “K” Terminating Machine 565435--5 can be used for terminating the contacts; however, it is
no longer being manufactured new. It has been superseded by AMP--O--LECTRIC Model “G” Terminating Machine
354500--1.
5.2. Contact Insertion and Extraction
An insertion tool is not usually required for inserting contacts into housings. However, an insertion tool is
available for inserting contacts crimped to small wire or when the wire bundle is too large for hand insertion.
An extraction tool is available for removing both pin and socket contacts from the housings.
10 of 12
Rev L
相关PDF资料
PDF描述
325223-19-0 TERM BARRIER 19CIRC SGL ROW .325
325222-19-0 TERM BARRIER 19CIRC SGL ROW .325
1375820-9 CONN RCPT HSNG 9POS CST-100 II
325221-19-0 TERM BARRIER 19CIRC SGL ROW .325
325213-19-0 TERM BARRIER 19CIRC SGL ROW .325
相关代理商/技术参数
参数描述
172807-BK013 制造商:Alpha Wire 功能描述:
172807-BL013 制造商:Alpha Wire 功能描述:
172807-GY013 制造商:Alpha Wire 功能描述:
172807-RD013 制造商:Alpha Wire 功能描述:
172807-SLATE-5000 制造商:Alpha Wire 功能描述: