参数资料
| 型号： | 172807-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/12页 |
| 文件大小： | 0K |
| 描述： | CONN HOUSING 2POS MINI UN M-N-L |
| RoHS指令信息： | 172807-1 Statement of Compliance |
| 3D 型号： | 172807-1.pdf |
| 标准包装： | 1,000 |
| 系列： | 迷你通用 MATE-N-LOK |
| 连接器类型： | 自配接 |
| 触点类型：： | 公形或母形 |
| 位置数： | 2 |
| 间距： | 0.323"（8.20mm） |
| 行数： | 1 |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 自然色 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 相关产品： | A100437CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100438CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN A100438TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100437TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL 1-770988-1-ND - CONTACT SKT 18-22AWG MINI-UMNL A100430TR-ND - CONTACT SKT 18-22AWG MINI-UMNL 1-770903-1-ND - CONTACT PIN 18-22AWG MINI-UMNL A100429TR-ND - CONTACT SKT 22-26AWG MINI-UMNL 更多... |
114-- 16017
2. REFERENCE MATERIAL
2.1. Revision Summary
Revisions to this application specification include:
S Updated application specification to corporate requirements
S Added DANGER to Section 1 and CAUTION to Paragraph 3.3
S Added hermaphroditic housing to Figure 1 and contact stop to Section 1, Figures 1 and 10, and
Paragraph 3.2,C
S Replaced superceded hand crimping tools in Section 5, and added NOTE to Paragraph 5.1
2.2. Customer Assistance
Reference Product Base Part Number 770166 and Product Code 1311 are representative of Mini--Universal
MATE--N--LOK connectors. Use of these numbers will identify the product line and expedite your inquiries
through a service network established to help you obtain product and tooling information. Such information can
be obtained through a local Representative or, after purchase, by calling PRODUCT INFORMATION at the
number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, the information contained in the Customer Drawings takes priority.
2.4. Specifications
Design Objective 108--5138 provides expected product performance and test information for connectors
(94V--O), and 108--5151 provides expected performance and test information for connectors (94V--2).
2.5. Instructional Material
Instruction Sheets (408--series) provide product assembly instructions or tooling setup and operation
procedures and Customer Manuals (409--series) provide machine setup and operating procedures.
Instruction material available that pertains to this product are:
408--3234 Mini--Universal MATE--N--LOK Connectors
408--4118 Extraction Tool 189727--1
408--4148 Straight Action Hand Tool 90710--2
408--4443 Straight Action Hand Tool 90717--2
408--7347 Insertion Tool 91002--1
408--8040 Heavy Duty Miniature Quick--Change Applicators (Side--Feed)
408--8547 CERTI--CRIMP* II Straight Action Hand Tools 91522--1 and 91536--1
408--9965 PRO--CRIMPER* III Hand Crimping Tool 90870--1
409--5128 AMP--O--LECTRIC* Model “K” Terminating Machine 565435--5
409--5842 AMP--O--LECTRIC Model “G” Terminating Machines 354500--[ ]
409--5852 AMPOMATOR* CLS III--G Lead--Making Machines 122500--[ ]
409--5878 AMPOMATOR CLS IV+ Lead--Making Machines 356500--[ ]
2.6. Manual
Manual 402--40 is available upon request and can be used as a guide in soldering. This manual provides
information on various flux types and characteristics along with the commercial designation and flux removal
procedures. A checklist is attached to the manual as a guide for information on soldering problems.
3. REQUIREMENTS
3.1. Wire Selection and Preparation
The contacts accept stranded wire sizes 30 to 16 AWG within the insulation diameter range listed in Figure 2.
The wire insulation shall be stripped to a length from 3.20 to 3.71 [.126 to .146] for one--wire crimping and 3.50
to 3.99 [.138 to .157] for two--wire crimping. Reasonable care shall be taken not to nick, scrape, or cut any
strands during the stripping operation.
2 of 12
Rev L
相关PDF资料 |
PDF描述 |
|---|---|
| 325223-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325222-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 1375820-9 | CONN RCPT HSNG 9POS CST-100 II |
| 325221-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325213-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 172807-BK013 | 制造商:Alpha Wire 功能描述: |
| 172807-BL013 | 制造商:Alpha Wire 功能描述: |
| 172807-GY013 | 制造商:Alpha Wire 功能描述: |
| 172807-RD013 | 制造商:Alpha Wire 功能描述: |
| 172807-SLATE-5000 | 制造商:Alpha Wire 功能描述: |
发布紧急采购，3分钟左右您将得到回复。