参数资料
| 型号： | 172807-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/12页 |
| 文件大小： | 0K |
| 描述： | CONN HOUSING 2POS MINI UN M-N-L |
| RoHS指令信息： | 172807-1 Statement of Compliance |
| 3D 型号： | 172807-1.pdf |
| 标准包装： | 1,000 |
| 系列： | 迷你通用 MATE-N-LOK |
| 连接器类型： | 自配接 |
| 触点类型：： | 公形或母形 |
| 位置数： | 2 |
| 间距： | 0.323"（8.20mm） |
| 行数： | 1 |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 自然色 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 相关产品： | A100437CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100438CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN A100438TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100437TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL 1-770988-1-ND - CONTACT SKT 18-22AWG MINI-UMNL A100430TR-ND - CONTACT SKT 18-22AWG MINI-UMNL 1-770903-1-ND - CONTACT PIN 18-22AWG MINI-UMNL A100429TR-ND - CONTACT SKT 22-26AWG MINI-UMNL 更多... |
114-- 16017
3.2. Contact Crimp Requirements
A. Carrier Cutoff
There shall be no burrs on the cutoff tab. The carrier cutoff tab length shall not exceed the dimension
given in Figure 2.
B. Crimp Height
The insulation barrel shall be formed around but not cut into the wire insulation. The wire barrel and
insulation barrel crimp height and width is given in Figure 2.
NOTE
i
The applied crimp dimension (within the function range of the product) is dependent on the termination tooling being
used. Refer to the documentation (applicator logs and instruction sheets) supplied with the termination tooling for the
applied crimp height.
C. Contact Stop
The contact stop must not be crimped. Any deformation to the contact stop will compromise the insertion
depth of the contact in the contact cavity of the housing.
D. Front and Rear Bellmouths
The front bellmouth shall be visible. The rear bellmouth shall conform to the dimensions given in Figure 2.
E. Wire Location
The end of the wire shall be flush with the end of the wire barrel or protrude no more than the dimension
given in Figure 2.
F. Locking Lances
The locking lances shall not be deformed.
Note: All requirements apply to both pin
and socket contact.
Locking Lances Not Deformed
Stack Wires as Shown
For 2--Wire Crimping
Wire Barrel
Locking Lances Not Deformed
Rev L
Contact Requirements
Wire Strands and Insulation
Both Visible in This Area
Contact Stop Not
Crimped or Deformed
End of Wire Flush With
End of Wire Barrel or
0.88 [.035] (Max) Wire Length
Front Bellmouth Visible
Contact Stop Not
Crimped or Deformed
0.25 [.010] Max Flash
0.50 [.020] Cutoff Tab Length
Figure 2 (Cont’d)
Insulation Barrel Formed
Around But Not Cutting
into Wire Insulation
Wire Barrel Seam Closed With
No Strands Protruding or Showing
0.10--0.51 [.004--.020] (Applicator)
0.10 [.004] Min (Hand Tool)
Rear Bellmouth
No Burrs on Cutoff Tab
3 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| 325223-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325222-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 1375820-9 | CONN RCPT HSNG 9POS CST-100 II |
| 325221-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325213-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 172807-BK013 | 制造商:Alpha Wire 功能描述: |
| 172807-BL013 | 制造商:Alpha Wire 功能描述: |
| 172807-GY013 | 制造商:Alpha Wire 功能描述: |
| 172807-RD013 | 制造商:Alpha Wire 功能描述: |
| 172807-SLATE-5000 | 制造商:Alpha Wire 功能描述: |
发布紧急采购，3分钟左右您将得到回复。