参数资料
| 型号： | 172807-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/12页 |
| 文件大小： | 0K |
| 描述： | CONN HOUSING 2POS MINI UN M-N-L |
| RoHS指令信息： | 172807-1 Statement of Compliance |
| 3D 型号： | 172807-1.pdf |
| 标准包装： | 1,000 |
| 系列： | 迷你通用 MATE-N-LOK |
| 连接器类型： | 自配接 |
| 触点类型：： | 公形或母形 |
| 位置数： | 2 |
| 间距： | 0.323"（8.20mm） |
| 行数： | 1 |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 自然色 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 相关产品： | A100437CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100438CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN A100438TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100437TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL 1-770988-1-ND - CONTACT SKT 18-22AWG MINI-UMNL A100430TR-ND - CONTACT SKT 18-22AWG MINI-UMNL 1-770903-1-ND - CONTACT PIN 18-22AWG MINI-UMNL A100429TR-ND - CONTACT SKT 22-26AWG MINI-UMNL 更多... |
114-- 16017
G. Wire Barrel Seam
The wire barrel seam shall be closed adequately to confine all strands of the wire. There shall be no loose
strands. Wire strands should not be embedded in the outside of the wire barrel.
H. Straightness
The contact, including the cutoff tab, shall not be bent above or below the datum line more than the
amount shown in Figure 3.
I. Twist and Roll
There shall be no twist or roll in crimped portion that will impair usage of the contact. See Figure 3.
Up--and--Down
Side--to--Side
Note: Not to Scale
Straightness
Twist and Roll
4 _ Max
4 _ Max
4 _ Max
Datum Line
Datum Line
10 _ Max
10 _ Max
Datum Line
Figure 3
3.3. Assembly
A crimped contact (pin or socket) must be inserted into the housing by aligning it with the desired contact cavity
in the BACK (wire side) of the housing. The wire must be grasped directly behind the insulation barrel and the
contact pushed straight into the contact cavity until the contact bottoms (there will be an audible click).
CAUTION
!
Excessive force must NOT be used when inserting the contact into the contact cavity. The contact stop of the contact
is designed to ensure proper insertion depth of the contact. Over--insertion will cause damage to the contact or contact
cavity of the housing and prevent the contact from floating in the contact cavity, which is necessary for optimum
performance of the connector.
The wire must be pulled back lightly to ensure that the contact is locked in place.
3.4. Panel Mounting (Cap Housing)
A. Thickness
The panel thickness range shall be 0.79 through 2.01 [.031 through .079].
B. Cutout
The dimensions of the panel cutout for panel mounting is provided in Figure 4.
Rev L
5 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| 325223-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325222-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 1375820-9 | CONN RCPT HSNG 9POS CST-100 II |
| 325221-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
| 325213-19-0 | TERM BARRIER 19CIRC SGL ROW .325 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 172807-BK013 | 制造商:Alpha Wire 功能描述: |
| 172807-BL013 | 制造商:Alpha Wire 功能描述: |
| 172807-GY013 | 制造商:Alpha Wire 功能描述: |
| 172807-RD013 | 制造商:Alpha Wire 功能描述: |
| 172807-SLATE-5000 | 制造商:Alpha Wire 功能描述: |
发布紧急采购，3分钟左右您将得到回复。