参数资料
型号: 20-101-1051
厂商: Rabbit Semiconductor
文件页数: 54/164页
文件大小: 0K
描述: MODULE RABBITCORE RCM3365
标准包装: 1
系列: RabbitCore®
模块/板类型: MPU 核心模块
适用于相关产品: RCM3365
其它名称: 316-1111
User’s Manual
141
E.3 Run a Program
You are now ready to run a sample program or develop a new application. Review these
steps to check your Dynamic C RabbitSys setup before you run a program.
1. Set the compiler to run the application in the fast program execution SRAM by select-
ing Code and BIOS in Flash, Run in RAM from the Dynamic C Options > Project
Options > Compiler
menu.
2. Enable separate instruction and data spaces and select “Compile program in RabbitSys
user mode” from the Dynamic C Options > Project Options > Compiler menu.
3. Enter the RCM3365 module’s IP address you used in Appendix E.1 by accessing the
Dynamic C Options > Project Options > Communications menu to select “Use TCP/
IP Connection.” You must also enter “32023” for the Control Port and the default login
values of “admin” and “password.”
E.3.1 Troubleshooting
If you compiled and ran a sample program with the RabbitSys project option disabled,
you may have overwritten the RabbitSys binary file. Use the serial programming cable
to connect programming header J1 on the RCM3365 to your PC COM port to reload
the RabbitSys binary file via the Dynamic C Compile > Reload RabbitSys binary
menu.
If you were unable to reload the RabbitSys binary file, your RCM3365 does not have
the firmware to support Dynamic C RabbitSys and cannot be used with Dynamic C
RabbitSys.
If Dynamic C returns an error message, check that the RCM3365 is powered correctly
— the red CORE LED on the Prototyping Board should be lit when the RCM3365 is
mounted on the Prototyping Board and the AC adapter is plugged in. Ensure that the
RCM3365 module is firmly and correctly installed in its connectors on the Prototyping
Board.
NOTE: The rdiscover utility will not work when the RCM3365 is connected directly to a
PC, notebook, or workstation via an Ethernet crossover cable unless the PC, notebook,
or workstation is running a DHCP server.
相关PDF资料
PDF描述
305-030-520-204 CONN CARDEDGE 30POS .156 GREEN
20-101-1196 MODULE RABBITCORE RCM3900
20-101-1105 MODULE RCM4100 RABBITCORE
20-101-1028 MODULE RABBITCORE RCM3750
046232104015800+ CONN FFC/FPC 4POS 1MM VERT SMD
相关代理商/技术参数
参数描述
20-101-1055 功能描述:模块化系统 - SOM RCM3375 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1066 功能描述:模块化系统 - SOM RCM3720 PROTO RS232 RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1067 功能描述:模块化系统 - SOM RCM3305 MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1068 功能描述:模块化系统 - SOM RCM3315 MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1087 制造商:Digi International 功能描述:RCM3365 RABBITSYS - Bulk 制造商:Digi International Inc 功能描述:BOARD PROTO RCM3365 RS232 制造商:Rabbit Semiconductor 功能描述:RCM3365 Rabbit Sys