- 您现在的位置：买卖IC网 > Datasheet目录596 > 312253-2 (TE Connectivity)CONN SMA DIE/SET 50OHM RG402 2PC Datasheet资料下载
参数资料
| 型号： | 312253-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | CONN SMA DIE/SET 50OHM RG402 2PC |
| 标准包装： | 1 |
| 压接或电缆尺寸： | RG/U-402 |
| 压接手柄： | A9966-ND |
| 连接器类型： | SMA |
| 产品目录页面： | 453 (CN2011-ZH PDF) |
| 配用： | 413249-1-ND - CONTACT JACK COAX 405SR 413242-1-ND - CONTACT PLUG BLIND MATE STR GOLD |
| 相关产品： | A9966-ND - TOOL SMA CRIMP FRAME ONLY |
| 其它名称： | A9964 |
408-6788
3. Squeeze the tool handles to crimp the connector
body to the cable.
Crimping Connectors with Fixed Collars
Panel Jack
— the connector collar faces forward, as shown in
Figure 11
3. Support the cable and connector assembly, and
squeeze the tool handles together to complete the
crimp.
Crimping Right-Angle Connectors
Figure 9
Sides of Panel Jack
Align with Dies as
Tool Jaws Close
Right-Angle
Connector
Locator
Knob
Crimping Connectors with
Retractable Collars
Coupling Nut
(Retractable)
Connector Collar
Facing Forward
Crimped
Connector
Collar
Cable
Chamfer
Connector
Body
Coupling Nut Positioned
Above Tool Head During
Crimping
Special Die
Set 312962-1
Figure 11
7. INTERNAL REFERENCE PLANES FOR CABLE
The dimensions shown in Figure 12 are from the
cable-bottoming surface or plane in the connector to
the mating reference plane.
8. CABLE BENDING
The 90° bending fixture assembly is used to make
precise right-angle bends on the cable near SMA
plugs as shown in Figure 13. Bends can have a radius
of 3.18mm [.125 in.] (on RG-402 or RG-405 cable),
6.35mm [.250 in.] (on RG-402 cable only), or 1.57mm
[.062 in.] (on RG-405 cable only).
Figure 10
6.3. For Right-Angle Connectors
Right-angle connectors require Locator 312173-1
which is not included in the kit and MUST be ordered
separately. Proceed as follows:
1. Slide the connector, flange end first, over the
cable end as shown in Figure 11.
2. Place the connector and cable inside of the tool
locator, making sure that:
— the recessed area of the connector body sits
squarely on the locator knob
Rev L
The spacer shown in Figure 14 must be positioned
behind the dummy jack when bending:
— RG-402 cable to either 3.18mm [.125 in.] or
6.35mm [.250 in.] radii terminated onto plugs
with center contacts
— RG-405 cable to 1.57mm [.062 in.] or 3.18mm
[.125 in.] radii when terminated onto plugs with
center contacts except Short Plugs 221447-[ ].
For short plugs, a special spacer is required and
MUST be ordered separately from Special Kit
220224-2
Loosen the dummy jack to insert the spacer, and re-
tighten the jack before proceeding.
7 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| 318837-1 | EXTRACTION TOOL .093 CONN |
| 3430-1000 | DISCRETE WIRE INSERTION TOOL |
| 3430-2000 | DISCRETE WIRE HAND TOOL |
| 3430-4000 | HEADER ROLL PIN INSERTER |
| 350-MX23-2 | TOOL CRIMP FOR MX23 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 31226103 | 制造商:METZ CONNECT USA 功能描述: |
| 31226106 | 制造商:METZ CONNECT USA 功能描述: |
| 31226108 | 制造商:METZ CONNECT USA 功能描述: |
| 31226110 | 制造商:METZ CONNECT USA 功能描述: |
| 31-2264 | 制造商:AMPHENOL 制造商全称:AMPHENOL 功能描述:TNC Jacks |
发布紧急采购，3分钟左右您将得到回复。