- 您现在的位置：买卖IC网 > Datasheet目录601 > 58560-1 (TE Connectivity)TOOL CRIMP MODULAR 10 POS W/DIE Datasheet资料下载
参数资料
| 型号： | 58560-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP MODULAR 10 POS W/DIE |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 模块 - RJ50（10p10c） |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 303 (CN2011-ZH PDF) |
| 配用： | 5-406938-2-ND - CONN MOD PLUG 10-10 ROUND STRAND A106449-ND - MOD PLG ASSY/10POS/RND CBL 500PC A9129-ND - CONN MOD PLUG 10-10 ROUND STRAND |
| 其它名称： | A9798 |
Figure 2
Before proceeding, Ensure that cable and plug are
compatible, and that cable polarity is correctly
1. Close the tool handles until the ratchet releases,
and allow the handles to open fully. Remove the
nut and both die retaining screws from the tool
jaws.
2. Place the insulation/wire stuffer assembly as
shown in Figure 2. Insert short die retaining pins
and short die retaining screw through the tool
frame, and tighten the screw.
3. Place housing support in the moving jaw of the
tool frame as shown in Figure 2. Mount right hand
housing guide using long die retaining pins, and
secure with long die retaining screw. Mount left
hand housing guide and tighten nut.
4. To disassemble, close the tool handles until the
ratchet releases, remove nut, screws, housing
guides, retaining pins, housing support, and
insulation/wire stuffer assembly.
maintained for your specific application.
Refer to Figure 1 and select cable of the specified
size and type. Strip the cable jacket to the length
indicated, taking care not to nick or cut wire
insulation. Proceed as follows:
1. Insert cable into plug until cable is fully
bottomed.
2. Hold the tool so that the back is facing you.
Squeeze the tool handles together and allow them
to open fully.
3. Insert plug assembly fully into die cavity until
plug bottoms in die cavity.
4. Squeeze handles until ratchet releases, and
remove terminated modular plug cable assembly.
5. Check the crimp height as described in Section
5, CRIMP HEIGHT INSPECTION. If necessary,
adjust the crimp height as described in Section 6,
CRIMP HEIGHT ADJUSTMENT.
Figure 3 shows a cutaway of a typical terminated plug
and the required location of the conductors. A visual
inspection through the plastic housing of the plug
should reveal whether the conductors are within the
acceptable range.
相关PDF资料 |
PDF描述 |
|---|---|
| 58605-2 | PROCRIMP DIE JPT W/SEAL |
| 58638-1 | TOOL TERM HEAD MTA .100 PIN |
| 58644-1 | TOOL HEAD MTA .100 MASS INSERT |
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
| 58707-2 | TOOL DIE SET ONLY 16-20 AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58560-2 | 功能描述:冲压机与冲模 10 POS MOD PLUG PRO-CRIMP DIE RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5856-1 WH005 | 制造商:Alpha Electronics Corporation 功能描述:EQUIPMENT WIRE 20AWG WHT |
| 58561 | 制造商:Alpha Wire Company 功能描述:WIRE UL1213 20 AWG WHITE 30.5M |
| 5856-10 VI005 | 制造商:Alpha Electronics Corporation 功能描述:EQUIPMENT WIRE 20AWG PUR |
| 585610 | 制造商:Alpha Wire Company 功能描述:WIRE UL1213 20 AWG VIOLET 30.5M |
发布紧急采购，3分钟左右您将得到回复。