参数资料
型号: 71M6532F-IGT/F
厂商: Maxim Integrated
文件页数: 23/121页
文件大小: 0K
描述: IC ENERGY METER 256KB 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 90
系列: *
FDS 6531/6532 005
Data Sheet 71M6531D/F-71M6532D/F
Accumulator ( ACC , A, SFR 0xE0 ):
ACC is the accumulator register. Most instructions use the accumulator to hold the operand. The
mnemonics for accumulator-specific instructions refer to accumulator as A , not ACC .
B Register ( SFR 0xF0 ):
The B register is used during multiply and divide instructions. It can also be used as a scratch-pad register
to hold temporary data.
Program Status Word ( PSW, SFR 0xD0 ):
This register contains various flags and control bits for the selection of the register banks (see Table 11 ).
Table 11: PSW Bit Functions ( SFR 0xD0 )
PSW Bit
7
6
5
4
Symbol
CV
AC
F0
RS1
Function
Carry flag.
Auxiliary Carry flag for BCD operations.
General-purpose Flag 0 available for user.
F0 is not to be confused with the F0 flag in the CESTATUS register.
Register bank select control bits. The contents of RS1 and RS0 select the
working register bank:
RS1/RS0 Bank selected Location
00
Bank 0
0x00 – 0x07
3
RS0
01
10
11
Bank 1
Bank 2
Bank 3
0x08 – 0x0F
0x10 – 0x17
0x18 – 0x1F
2
1
0
OV
-
P
Overflow flag.
User defined flag.
Parity flag, affected by hardware to indicate odd or even number of one bits in
the Accumulator, i.e. even parity.
Stack Pointer ( SP, SFR 0x81 ):
The stack pointer is a 1-byte register initialized to 0x07 after reset. This register is incremented before
PUSH and CALL instructions, causing the stack to begin at location 0x08.
Data Pointer:
The data pointers ( DPTR and DPRT1 ) are 2 bytes wide. The lower part is DPL(SFR 0x82) and DPL1
(SFR0x84) and the highest is DPH (SFR0x83) and DPH1 (SFR 0x85) . The data pointers can be loaded as
two registers (e.g. MOV DPL,#data8). They are generally used to access external code or data space
(e.g. MOVC A,@A+DPTR or MOVX A,@DPTR respectively).
Program Counter:
The program counter ( PC ) is 2 bytes wide and initialized to 0x0000 after reset. The PC is incremented
when fetching operation code or when operating on data from program memory.
Port Registers:
The I/O ports are controlled by Special Function Registers P0 , P1 and P2 as shown in Table 12 . The contents
of the SFR can be observed on corresponding pins on the chip. Writing a 1 to any of the ports causes the
corresponding pin to be at high level (V3P3). Writing a 0 causes the corresponding pin to be held at a low
level (GND). The data direction registers DIR0 , DIR1 and DIR2 define individual pins as input or output
pins (see Sections 1.5.7 Digital I/O – 71M6531D/F or 1.5.8 Digital I/O – 71M6532D/F ).
Rev 2
23
相关PDF资料
PDF描述
R1S12-1212/H CONV DC/DC 1W 12VIN 12VOUT
VI-BNW-EU-F3 CONVERTER MOD DC/DC 5.5V 200W
LM285MX-2.5/NOPB IC VREF SHUNT 2.5V 8-SOIC
RCD-24-1.20/W LED DRVR CONST 1.2A 3-33VOUT
78M6618-M/F/P1 IC PWR MEASUREMENT OCTAL 68QFN
相关代理商/技术参数
参数描述
71M6532F-IGTR/F 功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6532F-IGTR/F1 功能描述:计量片上系统 - SoC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6533 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Energy Meter IC
71M6533-DB 功能描述:开发板和工具包 - 8051 71M6533 Demo Brd RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:C8051F960, Si7005 核心: 接口类型:USB 工作电源电压:
71M6533G 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Exceeds IEC 62053/ANSI C12.20 Standards