参数资料
| 型号： | 71M6541F-DB |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 19/166页 |
| 文件大小： | 0K |
| 描述： | DEMO BOARD 71M6541F |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页第143页第144页第145页第146页第147页第148页第149页第150页第151页第152页第153页第154页第155页第156页第157页第158页第159页第160页第161页第162页第163页第164页第165页第166页
71M6541D/F/G and 71M6542F/G Data Sheet
Delay compensation and other functions in the CE code require the settings for MUX_DIV[3:0],
MUXx_SEL[3:0], RMT_E, FIR_LEN[1:0], ADC_DIV and PLL_FAST to be fixed for a given CE code.
Refer to Table 1 and Table 2 for the settings that are applicable to the 71M6541D/F/G and
71M6542F/G.
Table 4 summarizes the I/O RAM registers used for configuring the multiplexer, signals pins, and ADC.
All listed registers are 0 after reset and wake from battery modes, and are readable and writable.
Table 4: Multiplexer and ADC Configuration Bits
Name
MUX0_SEL[3:0]
MUX1_SEL[3:0]
MUX2_SEL[3:0]
MUX3_SEL[3:0]
MUX4_SEL[3:0]
MUX5_SEL[3:0]
MUX6_SEL[3:0]
MUX7_SEL[3:0]
MUX8_SEL[3:0]
MUX9_SEL[3:0]
MUX10_SEL[3:0]
ADC_DIV
MUX_DIV[3:0]
PLL_FAST
FIR_LEN[1:0]
DIFFA_E
DIFFB_E
RMT_E
PRE_E
Location
2105[3:0]
2105[7:4]
2104[3:0]
2104[7:4]
2103[3:0]
2103[7:4]
2102[3:0]
2102[7:0]
2101[3:0]
2101[7:0]
2100[3:0]
2200[5]
2100[7:4]
2200[4]
210C[1]
210C[4]
210C[5]
2709[3]
2704[5]
Description
Selects the ADC input converted during time slot 0.
Selects the ADC input converted during time slot 1.
Selects the ADC input converted during time slot 2.
Selects the ADC input converted during time slot 3.
Selects the ADC input converted during time slot 4.
Selects the ADC input converted during time slot 5.
Selects the ADC input converted during time slot 6.
Selects the ADC input converted during time slot 7.
Selects the ADC input converted during time slot 8.
Selects the ADC input converted during time slot 9.
Selects the ADC input converted during time slot 10.
Controls the rate of the ADC and FIR clocks.
The number of ADC time slots in each multiplexer frame (maximum = 11).
Controls the speed of the PLL and MCK.
Determines the number of ADC cycles in the ADC decimation FIR filter.
Enables the differential configuration for analog input pins IAP-IAN.
Enables the differential configuration for analog input pins IBP-IBN.
Enables the remote sensor interface transforming pins IBP-IBN into a
digital balanced differential pair for communications with the 71M6x01
sensor.
Enables the 8x pre-amplifier.
Refer to Table 76 starting on page 111 for more complete details about these I/O RAM locations.
2.2.3
Delay Compensation
When measuring the energy of a phase (i.e., Wh and VARh) in a service, the voltage and current for that
phase must be sampled at the same instant. Otherwise, the phase difference, Ф , introduces errors.
φ =
t delay
T
? 360 o = t delay ? f ? 360 o
Where f is the frequency of the input signal, T = 1/f and t delay is the sampling delay between current and
voltage.
Traditionally, sampling is accomplished by using two A/D converters per phase (one for voltage and the
other one for current) controlled to sample simultaneously. Maxim’s Single-Converter Technology,
however, exploits the 32-bit signal processing capability of its CE to implement “constant delay” all-pass
filters. The all-pass filter corrects for the conversion time difference between the voltage and the
corresponding current samples that are obtained with a single multiplexed A/D converter.
The “constant delay” all-pass filter provides a broad-band delay 360 o – θ, which is precisely matched to
the difference in sample time between the voltage and the current of a given phase. This digital filter
does not affect the amplitude of the signal, but provides a precisely controlled phase response.
The recommended ADC multiplexer sequence samples the current first, immediately followed by
sampling of the corresponding phase voltage, thus the voltage is delayed by a phase angle Ф relative to
Rev 4
相关PDF资料 |
PDF描述 |
|---|---|
| 71M6543F-DB-CT | DEMO BOARD 71M6543F-DB-CT |
| 72-CNV-5 | CONVERTER RS-232 TO RS-422 5V |
| 72346-001 | 72346-1-SCA-II REC |
| 72347-001LF | CONN RECEPT SCA2 20POS VERT PCB |
| 72436-001LF | 80POS EXT HT. REC SCA-2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 71M6541F-IGT/F | 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6541F-IGTR/F | 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6541FT-IGT/F | 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Rail/Tube |
| 71M6541FT-IGTR/F | 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Tape and Reel |
| 71M6541G | 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6541D/71M6541F/71M6541G/71M6542F/71M6542G 是 TeridianTM 的第4 代高集成度单相电表SoC |
发布紧急采购，3分钟左右您将得到回复。