参数资料
型号: 73M1906B-IVT/F
厂商: Maxim Integrated Products
文件页数: 72/88页
文件大小: 0K
描述: MICRODAA SET FXO OF VOIP 20TSSOP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 74
系列: *
73M1866B/73M1966B Data Sheet
DS_1x66B_001
74
Rev. 1.6
11.7 Voltage and Current Detection
The 73M1x66B is capable of detecting the following circumstances:
Under voltage on the line.
Over voltage on the line.
Over current.
These 73M1x66B built-in mechanisms provide protection to both the device itself and the external line
circuitry.
If enabled, Over Voltage and Over Current detection will cause the 73M1x66B to go on-hook without the
intervention of the host.
If configured in Line Powered Mode, the detection of an under-voltage condition causes the 73M1x66B to
switch automatically to Barrier Powered Operation (see Section 9.2.1). This is done without the
intervention of the host.
For each of the detection functions there are enable control bits and detection status bits. For each
function there is a master detection function enable bit that must be set in order for the functions to work.
11.8 Under Voltage Detection (UVD)
Under Voltage Detection is an important feature of 73M1x66B. It determines if the phone line is not
capable of supplying the current that the 73M1x66B requires from the line for proper operation. If this
function is enabled and if the line is not capable of providing this current, the UVD condition will be
asserted and can become a source of interrupt from the 73M1x66B to its connected host.
11.9 Over Voltage Detection (OVD)
If enabled, Over Voltage Detection is indicated if the device senses that the line voltage exceeds a
defined threshold. The device allows the selection of choice of either 60 Vpk or 70 Vpk (depending upon
the attenuation ratio, typically this is 100:1).
If enabled, the 73M1x66B will automatically go on-hook if over voltage is detected.
11.10 AC Signal Overload Detection
This is the same feature as used for the detection of billing tones (see Section 10.4). In this most generic
sense, this detector provides an indicator that the AC signal on the line exceeds a value of 3.5 Vpk.
11.11 Over Current Detection (OID)
When the line current exceeds the safe operating range of the 73M1x66B or the external transistors, the
device indicates this condition. If enabled, the 73M1x66B will automatically go on-hook if an over current
event is detected.
相关PDF资料
PDF描述
73M1916-IVT/F MICRODAA SET FXO OF VOIP 20TSSOP
73M1916-IVTR/F MICRODAA SET FXO OF VOIP 20TSSOP
MC908QY4CDWER IC MCU 8BIT 4K FLASH 16-SOIC
MC908QY4ACDWER IC MCU 8BIT 4K FLASH 16-SOIC
S9S08SL8F1CTJ IC MCU 8BIT 8KB FLASH 20TSSOP
相关代理商/技术参数
参数描述
73M1906B-IVTR/F 功能描述:电信线路管理 IC DAA-FXO VOLP System Host Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
73M1906-IVT/F 制造商:TERIDIAN 功能描述:
73M1912-IM/F 功能描述:电信线路管理 IC MicroDAA Chip Set Line Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
73M1912-IMR/F 功能描述:电信线路管理 IC MicroDAA Chip Set Line Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
73M1912-IVT/F 功能描述:电信线路管理 IC MicroDAA Chip Set Line Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray