- 您现在的位置：买卖IC网 > Datasheet目录611 > 90313-2 (TE Connectivity)SAHT Datasheet资料下载
参数资料
| 型号： | 90313-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | SAHT |
| 标准包装： | 1 |
| 系列： | Certi-Crimp |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | FFC，FPC（扁平柔性）触点，26-32 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 88017-6-ND - CONN CONTACT SOCKET 26-32AWG FFC |
The wire stop aids in locating the wire in the contact.
The ejector pulls the locator down, and ejects the
crimped contact when the tool handles are FULLY
opened.
The ratchet ensures full crimping of the contact. Once
engaged, the ratchet will not release until the handles
have been FULLY closed.
Refer to Figure 2 and select wire of the specified size
and insulation diameter. Strip the wire to the length
indicated – Do NOT cut or nick the wire strands.
Select an applicable loose–piece contact, and identify
the appropriate crimping chamber (according to the
wire size markings on the BACK of the tool).
Refer to Figure 3 and proceed as follows:
1. Hold the tool so the BACK (wire side) faces you.
2. Make sure the ratchet is released. Squeeze the
tool handles together and allow them to open
FULLY.
Figure 3
3. Looking straight into BACK of appropriate
crimping chamber, insert the contact (stabilizer
first) into the FRONT of the crimping chamber.
Position the contact in the dies so that the locator
enters locator slot (between the insulation and wire
barrels) in the contact.
4. Hold the contact in this position and squeeze
the tool handles together until the insulation anvil
starts entry into the insulation crimper. Do NOT
deform the insulation barrel or wire barrel.
5. Insert a properly stripped wire through the wire
slot in the locator and into the wire barrel of the
contact until the wire butts against the wire stop.
6. Holding the wire in place, squeeze the tool
handles until the ratchet releases.
7. Allow the tool handles to open fully so that the
ejector can push the contact out of the crimpers.
Remove the crimped contact from the tool.
1. Remove all foreign particles with a clean, soft
brush, or a clean, soft, lint–free cloth. Make sure
the proper retaining pins are in place, and are
secured with the proper retaining rings.
相关PDF资料 |
PDF描述 |
|---|---|
| 90327-1 | SAHT TYPE VI |
| 90348-2 | DIE W/O 69710-1 8 F IS7918 |
| 90381-1 | S.A.H.T |
| 90384-1 | TOOL 10AWG CPC SERIES 3 CRIMP |
| 90390-3 | DIE SET ULTRA-FASTONS 22-18 AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 903-135 | 功能描述:支架与垫片 Plastic Spcr .135 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90313A204 | 制造商:WASHERS 功能描述: |
| 9031-3CC | 制造商:Carlisle Interconnect Components 功能描述:RF COAXIAL PANEL MOUNT CONNECTOR |
| 9031-3CCSF | 制造商:Carlisle Interconnect Components 功能描述:RF COAXIAL PANEL MOUNT CONNECTOR |
| 9031-3SF | 制造商:Carlisle Interconnect Components 功能描述:RF COAXIAL PANEL MOUNT CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。