- 您现在的位置：买卖IC网 > Datasheet目录611 > 90327-1 (TE Connectivity)SAHT TYPE VI Datasheet资料下载
参数资料
| 型号： | 90327-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | SAHT TYPE VI |
| 标准包装： | 5 |
| 系列： | Certi-Crimp, 多配接 VI 型 |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 背板和圆形触点，18-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 66591-4-ND - CONN PIN 18-22 AWG GOLD CRIMP 66592-4-ND - CONN SOCKET 18-22 AWG GOLD CRIMP 66591-1-ND - CONN PIN 18-22 AWG TIN CRIMP 66591-2-ND - CONN PIN 18-22 AWG GOLD CRIMP 66592-2-ND - CONN SOCKET 18-22 AWG GOLD CRIMP |
?
?
Hand Crimping Tool 90327-1
Instruction Sheet
408-7716
07 SEP 12 Rev D
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
The FRONT of the tool, into which the contact is
NOTE
i
Insulation Crimp
Adjustment Lever
CERTI-CRIMP* ?
Tool Ratchet
1. INTRODUCTION
Figure 1
Crimpers ?
(Fixed Dies)
Anvils ?
(Moving Dies
Front ?
of Tool
inserted, has the tool number marked on it. The BACK
of the tool, into which the wire is inserted, has the wire
size marked above each crimping chamber.
The insulation crimp adjustment lever is used to
regulate the crimp height of the contact insulation
barrel. The contact support prevents the contact from
bending during the crimping operation.
The locator/insulation stop positions the contact
between the dies before crimping and limits the
insertion distance of the stripped wire into the contact.
In use, it rests in the locator slot of the contact. The
wire stop helps to position the contact between the
dies and locate the wire in the contact. The ejector
pulls the locator down and ejects the crimped contact.
The ratchet assures full crimping of the contact. Once
engaged, the ratchet will not release until the handles
have been FULLY closed.
The dies bottom before the ratchet releases. This
feature ensures maximum electrical and tensile
performance of the crimp. Do NOT re-adjust the
ratchet.
3. CRIMPING PROCEDURE
Make sure that the specified wire size and insulation
diameter is compatible with the contact and tool. Strip
the wire to the length indicated in Figure 2-do NOT cut
or nick the wire strands.
Hand Crimping Tool 90327-1 (shown in Figure 1) is
used to crimp Type VI Multimate contacts listed in
Figure 2 onto wire sizes 22 through 18 AWG with an
insulation diameter range of 1.27 through 2.79 [.050
through .110]. Read these instructions thoroughly
before crimping any contacts.
Typical Type VI
Multimate Contacts
Locator ?
Slot
Pin
4.37 [.172] Wire
Strip Length
NOTE
i
Dimensions on this instruction sheet are in metric
units [with inches in brackets]. Figures are not
drawn to scale. ?
Socket
Insulation
Barrel
Wire ?
Barrel
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
WIRE
CONTACT
2. DESCRIPTION
The tool features two fixed dies (crimpers), two
moving dies (anvils), insulation crimp adjustment
lever, contact support, locator/insulation stop, ejector,
SIZE
RANGE
(AWG)
22-18
INSUL.DIA
1.27-2.79
[.050-.110]
LOOSE
PIECE
66591-[ ] (Pin)
66592-[ ] (Skt)
STRIP-FORM
66581-[ ] (Pin)
66582-[ ] (Skt)
and CERTI-CRIMP tool ratchet. When mated, the dies
form two crimping chambers.
Figure 2
? 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 4
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
相关PDF资料 |
PDF描述 |
|---|---|
| 90348-2 | DIE W/O 69710-1 8 F IS7918 |
| 90381-1 | S.A.H.T |
| 90384-1 | TOOL 10AWG CPC SERIES 3 CRIMP |
| 90390-3 | DIE SET ULTRA-FASTONS 22-18 AWG |
| 90431-1 | TOOL CERTI-CRIMP HAND 20-24AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 903273304 | 制造商:Molex 功能描述: |
| 90327-3304 | 功能描述:集管和线壳 4CKT IDT RECPT LO PROFILE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 903273306 | 制造商:Molex 功能描述: |
| 90327-3306 | 功能描述:集管和线壳 PICOFLEX 6P HSG LOPRO IDT AU RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 903273308 | 制造商:Molex 功能描述: |
发布紧急采购，3分钟左右您将得到回复。