- 您现在的位置：买卖IC网 > Datasheet目录611 > 90752-1 (TE Connectivity)SEATING TOOL ASSY H.M. 110 PIN Datasheet资料下载
参数资料
| 型号： | 90752-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | SEATING TOOL ASSY H.M. 110 PIN |
| 标准包装： | 1 |
| 系列： | * |
ACTION PIN Contact
(110 Places)
Seating Tool 90752-1 for Z-PACK*
110-Position 2mm HM Pin Header
With ACTION PIN* Contacts
Seating Tool
Instruction Sheet
408-9911
01 DEC 11 Rev B
Adapter
Blade (2 Places)
Z-PACK 2mm HM Pin
Header 100143-1 (Shown)
Printed Circuit (PC) Board
(Ref)
PC Board Support Fixture
(Customer Supplied, Ref)
Figure 1
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
i
1. INTRODUCTION
Seating Tool 90752-1 is used to seat a 110-position ?
Z-PACK 2mm HM pin header with ACTION PIN
contacts to allow solderless printed circuit (pc) board
installation. Read these instructions and understand
them before using the seating tool.
NOTE
Dimensions are in millimeters [and inches]. ?
Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
The seating tool is an assembly of two blades and an
adapter. See Figure 1.
During seating, the seating tool sits inside the housing
of the pin header with the blades engaging the
housing floor and contact shoulders preventing the
contacts from pushing out of the housing.
3. REQUIREMENTS
3.1. PC Board Support Fixture (Customer Supplied)
A pc board support must be used to provide proper
support for the pc board and alignment of the tool to
the pin header and to protect the pc board and pin
header contacts from damage. Design a pc board
support fixture using the recommendations in
instruction sheet 408-6927.
3.2. Application Tooling
Power for the seating tool must be provided by an
application tool (with a ram) capable of supplying a
downward force of 133 N [30 lb] per contact.
Manual Electric Servo Presses (CMP 6T) 1585699-8
and (CMP 12T) 1585698-8, and Bench Top Electric
Servo Press (CBP 5T) 1585696-9 are available for this
seating tool. For information on the presses, visit the
press-fit assembly equipment website at ?
http://tooling.te.com/pressfit.asp .
? 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 3
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 90754-3 | SEATING TOOL ASSY HM 95 PIN |
| 90756-1 | SEATING TOOL ASSY H.M. 55 PINS |
| 90757-1 | SEATING TOOL ASSY H.M. 77 PINS |
| 90758-2 | DIE SET FOR PRO-C III 26-22 AWG |
| 90759-2 | DIE SET FOR PRO-C III 22-20,18 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 907523-000 | 制造商:TE Connectivity 功能描述:High Performance Cable 1Conductors 12AWG 3.71mm Tin Plated Copper White 600VAC 制造商:TE Connectivity 功能描述:CBL 1CNDCTR 12AWG 3.71MM TN PLTD CPPR WH 600VAC - Cable Rools/Shrink Tubing |
| 907-525 | 功能描述:支架与垫片 Plastic Spcr .525 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 9075-2R | 制造商:GC Electronics 功能描述: |
| 907-530 | 功能描述:支架与垫片 Plastic Spcr .53 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90753-1 | 功能描述:手工工具 SEATING TOOL ASSY H. RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
发布紧急采购，3分钟左右您将得到回复。