- 您现在的位置：买卖IC网 > Datasheet目录613 > 91963-2 (TE Connectivity)S.D.E.PREM.DIE ASSY 16-14 PIDG Datasheet资料下载
参数资料
| 型号： | 91963-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/7页 |
| 文件大小： | 0K |
| 描述： | S.D.E.PREM.DIE ASSY 16-14 PIDG |
| 标准包装： | 1 |
| 系列： | * |
1. Turn off the SDE 1600 Power Unit and
disconnect it from the power supply.
2. Depress the lever on the power unit to open the
die holders.
3. Install indenter dies in the stationary jaw of the
tool frame. Align the dies with the retaining screw
hole, then secure dies with the die–retaining
screws. Do NOT fully tighten dies.
4. Install anvil dies in the movable jaw of the tool
frame. Align the dies with the retaining screw hole,
then secure dies with the die–retaining screws. Do
NOT fully tighten.
5. Release the lever on the power unit. This allows
spring pressure to close the jaws. The dies will
align themselves.
6. Install the locator assembly (packaged
separately) to the die assembly.
7. Securely tighten the die retaining screws while
Figure 1
SDE Premium Crimping Die Assemblies 91963–[ ]
(Figure 1) are designed to crimp the connectors in
Figure 2 onto wire when used in an SDE 1600 Power
Unit 1583034–[ ]. Refer to Figure 2 for a list of
connectors and the appropriate wire sizes.
Refer to instructions packaged with SDE 1600 Power
Unit for information concerning the power unit
1583034–[ ].
Each crimping die assembly consists of two indenter
dies and two anvil dies, which when closed form two
crimping chambers. The larger crimping chambers
crimp the insulation of the connector onto the
insulation of the wire. The smaller crimping chamber
crimps the center contact onto the center conductor
of the wire. Each die is held in the SDE 1600 power
tool by shoulder screws.
the dies are bottomed.
1. Depress the lever on the power unit to open the
die holders.
2. Turn off the SDE 1600 Power Unit and
disconnect it from the power supply.
3. Loosen the die holding screws and remove the
dies.
Select the appropriate wire size and connector. The
wire size and insulation diameter must be within the
specified range for the connector.
For detailed information on wire strip lengths and
proper assembly of the connector, refer to the
instructions packaged with the connector.
1. Turn on the SDE 1600 Power Unit and allow
approximately five seconds for the hydraulic
pressure to build up.
2. Open the crimping dies by depressing the
control lever on the power unit.
相关PDF资料 |
PDF描述 |
|---|---|
| 91964-2 | S.D.E.PREM.DIE ASSY 22-16 PIDG |
| 91965-2 | S.D.E.PREM.DIE ASSY 12-10 PIDG |
| 929013 | KNOCKOUT TOOL |
| 931800-1 | ELEC PWR UNIT W/O F/TRK OR HD |
| 937317-1 | TOOL PUNCH MINI CT PISTOL GRIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91-9636-27 | 制造商:GLOBAL MEASUREMENT AND CONTROL 功能描述:WIRE PTFE 7/0.15 A YELLOW 100M |
| 91963-P2S2 | 制造商:Nuvoton Technology Corp 功能描述:Transformer Toroidal 160VA 2x55V o/p 制造商:NUVOTEM 功能描述:160VA TOROIDAL TX 2X0-55V |
| 919641-000 | 制造商:TE Connectivity 功能描述:101A052-100-0 - Bag 制造商:TE Connectivity 功能描述:BOOT MOLDED |
| 91964-2 | 功能描述:冲压机与冲模 S.D.E.PREM.DIE ASSY 22-16 PIDG RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 91-9642-27 | 制造商:GLOBAL MEASUREMENT AND CONTROL 功能描述:WIRE PTFE A YELLOW 7/0.2MM 25M |
发布紧急采购，3分钟左右您将得到回复。