参数资料
型号: A3PN030-Z1QNG48
厂商: Microsemi SoC
文件页数: 19/114页
文件大小: 0K
描述: IC FPGA NANO 30K GATES 48-QFN
标准包装: 260
系列: ProASIC3 nano
输入/输出数: 34
门数: 30000
电源电压: 1.425 V ~ 1.575 V
安装类型: 表面贴装
工作温度: 0°C ~ 70°C
封装/外壳: 48-VFQFN 裸露焊盘
供应商设备封装: 48-QFN(6x6)
ProASIC3 nano Device Overview
1-6
Revision 11
SRAM and FIFO
ProASIC3 nano devices (except the A3PN030 and smaller devices) have embedded SRAM blocks along
their north and south sides. Each variable-aspect-ratio SRAM block is 4,608 bits in size. Available
memory configurations are 256×18, 512×9, 1k×4, 2k×2, and 4k×1 bits. The individual blocks have
independent read and write ports that can be configured with different bit widths on each port. For
example, data can be sent through a 4-bit port and read as a single bitstream. The embedded SRAM
blocks can be initialized via the device JTAG port (ROM emulation mode) using the UJTAG macro
(except in A3PN030 and smaller devices).
In addition, every SRAM block has an embedded FIFO control unit. The control unit allows the SRAM
block to be configured as a synchronous FIFO without using additional core VersaTiles. The FIFO width
and depth are programmable. The FIFO also features programmable Almost Empty (AEMPTY) and
Almost Full (AFULL) flags in addition to the normal Empty and Full flags. The embedded FIFO control
unit contains the counters necessary for generation of the read and write address pointers. The
embedded SRAM/FIFO blocks can be cascaded to create larger configurations.
PLL and CCC
Higher density ProASIC3 nano devices using either the two I/O bank or four I/O bank architectures
provide the designer with very flexible clock conditioning capabilities. A3PN060, A3PN125, and
A3PN250 contain six CCCs. One CCC (center west side) has a PLL. The A3PN030 and smaller devices
use different CCCs in their architecture. These CCC-GLs contain a global MUX but do not have any
PLLs or programmable delays.
For devices using the six CCC block architecture, these six CCC blocks are located at the four corners
and the centers of the east and west sides.
All six CCC blocks are usable; the four corner CCCs and the east CCC allow simple clock delay
operations as well as clock spine access. The inputs of the six CCC blocks are accessible from the
FPGA core or from dedicated connections to the CCC block, which are located near the CCC.
The CCC block has these key features:
Wide input frequency range (fIN_CCC) = 1.5 MHz to 350 MHz
Output frequency range (fOUT_CCC) = 0.75 MHz to 350 MHz
Clock delay adjustment via programmable and fixed delays from –7.56 ns to +11.12 ns
2 programmable delay types for clock skew minimization
Clock frequency synthesis (for PLL only)
Additional CCC specifications:
Internal phase shift = 0°, 90°, 180°, and 270°. Output phase shift depends on the output divider
configuration (for PLL only).
Output duty cycle = 50% ± 1.5% or better (for PLL only)
Low output jitter: worst case < 2.5% × clock period peak-to-peak period jitter when single global
network used (for PLL only)
Maximum acquisition time = 300 s (for PLL only)
Low power consumption of 5 mW
Exceptional tolerance to input period jitter—allowable input jitter is up to 1.5 ns (for PLL only)
Four precise phases; maximum misalignment between adjacent phases of 40 ps × (350 MHz /
fOUT_CCC) (for PLL only)
Global Clocking
ProASIC3 nano devices have extensive support for multiple clocking domains. In addition to the CCC
and PLL support described above, there is a comprehensive global clock distribution network.
Each VersaTile input and output port has access to nine VersaNets: six chip (main) and three quadrant
global networks. The VersaNets can be driven by the CCC or directly accessed from the core via
multiplexers (MUXes). The VersaNets can be used to distribute low-skew clock signals or for rapid
distribution of high fanout nets.
相关PDF资料
PDF描述
ESA50DTAN CONN EDGECARD 100PS R/A .125 SLD
A3PN020-2QNG68 IC FPGA NANO 20K GATES 68-QFN
EMA50DTAN CONN EDGECARD 100PS R/A .125 SLD
AGLN010V5-QNG48 IC FPGA NANO 1KB 10K 48-QFN
ESA50DTAH CONN EDGECARD 100PS R/A .125 SLD
相关代理商/技术参数
参数描述
A3PN030-Z1QNG48I 功能描述:IC FPGA NANO 30K GATES 48-QFN RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA(现场可编程门阵列) 系列:ProASIC3 nano 标准包装:152 系列:IGLOO PLUS LAB/CLB数:- 逻辑元件/单元数:792 RAM 位总计:- 输入/输出数:120 门数:30000 电源电压:1.14 V ~ 1.575 V 安装类型:表面贴装 工作温度:-40°C ~ 85°C 封装/外壳:289-TFBGA,CSBGA 供应商设备封装:289-CSP(14x14)
A3PN030-Z1QNG68 功能描述:IC FPGA NANO 30K GATES 68-QFN RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA(现场可编程门阵列) 系列:ProASIC3 nano 标准包装:152 系列:IGLOO PLUS LAB/CLB数:- 逻辑元件/单元数:792 RAM 位总计:- 输入/输出数:120 门数:30000 电源电压:1.14 V ~ 1.575 V 安装类型:表面贴装 工作温度:-40°C ~ 85°C 封装/外壳:289-TFBGA,CSBGA 供应商设备封装:289-CSP(14x14)
A3PN030-Z1QNG68I 功能描述:IC FPGA NANO 30K GATES 68-QFN RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA(现场可编程门阵列) 系列:ProASIC3 nano 标准包装:152 系列:IGLOO PLUS LAB/CLB数:- 逻辑元件/单元数:792 RAM 位总计:- 输入/输出数:120 门数:30000 电源电压:1.14 V ~ 1.575 V 安装类型:表面贴装 工作温度:-40°C ~ 85°C 封装/外壳:289-TFBGA,CSBGA 供应商设备封装:289-CSP(14x14)
A3PN030-Z1VQ100 功能描述:IC FPGA NANO 30K GATES 100-VQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - FPGA(现场可编程门阵列) 系列:ProASIC3 nano 标准包装:152 系列:IGLOO PLUS LAB/CLB数:- 逻辑元件/单元数:792 RAM 位总计:- 输入/输出数:120 门数:30000 电源电压:1.14 V ~ 1.575 V 安装类型:表面贴装 工作温度:-40°C ~ 85°C 封装/外壳:289-TFBGA,CSBGA 供应商设备封装:289-CSP(14x14)
A3PN030-Z1VQ100I 功能描述:IC FPGA NANO 30K GATES 100-VQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - FPGA(现场可编程门阵列) 系列:ProASIC3 nano 标准包装:152 系列:IGLOO PLUS LAB/CLB数:- 逻辑元件/单元数:792 RAM 位总计:- 输入/输出数:120 门数:30000 电源电压:1.14 V ~ 1.575 V 安装类型:表面贴装 工作温度:-40°C ~ 85°C 封装/外壳:289-TFBGA,CSBGA 供应商设备封装:289-CSP(14x14)