- 您现在的位置：买卖IC网 > PDF目录8746 > AD5310BRMZ-REEL7 (Analog Devices Inc)IC DAC 10BIT R-R W/BUFF 8-MSOP PDF资料下载
参数资料
| 型号： | AD5310BRMZ-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 2/16页 |
| 文件大小： | 0K |
| 描述： | IC DAC 10BIT R-R W/BUFF 8-MSOP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 1,000 |
| 设置时间： | 6µs |
| 位数： | 10 |
| 数据接口： | 串行 |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 1.25mW |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 1 电压，单极；1 电压，双极 |
| 采样率（每秒）： | 167k |
AD5310
Data Sheet
Rev. B | Page 10 of 16
TERMINOLOGY
Relative Accuracy
For the DAC, relative accuracy or integral nonlinearity (INL) is
a measure of the maximum deviation, in LSBs, from a straight
line passing through the endpoints of the DAC transfer function.
A typical INL vs. code plot is shown in Figure 5.
Differential Nonlinearity
Differential nonlinearity (DNL) is the difference between the
measured change and the ideal 1 LSB change between any two
adjacent codes. A specified differential nonlinearity of ±1 LSB
maximum ensures monotonicity. This DAC is guaranteed mono-
tonic by design. A typical DNL vs. code plot is shown in Figure 6.
Zero Code Error
Zero code error is a measure of the output error when zero code
(000 hex) is loaded to the DAC register. Ideally, the output should
be 0 V. The zero code error is always positive in the AD5310
because the output of the DAC cannot go below 0 V. It is due to
a combination of the offset errors in the DAC and output amplifier.
Zero code error is expressed in mV. A plot of zero code error vs.
temperature is shown in Figure 9.
Full-Scale Error
Full-scale error is a measure of the output error when full-scale
code (3FF Hex) is loaded to the DAC register. Ideally, the output
should be VDD 1 LSB. Full-scale error is expressed as a percentage
of the full-scale range. A plot of full-scale error vs. temperature
is shown in Figure 9.
Gain Error
Gain error is a measure of the span error of the DAC. It is the
deviation in slope of the DAC transfer characteristic from the
ideal expressed as a percentage of the full-scale range.
Total Unadjusted Error
Total unadjusted error (TUE) is a measure of the output error
that takes all the various errors into account. A typical TUE vs.
code plot is shown in Figure 7.
Zero Code Error Drift
Zero code error drift is a measure of the change in zero code
error with a change in temperature. It is expressed in V/°C.
Gain Error Drift
Gain error drift is a measure of the change in gain error with
changes in temperature. It is expressed in (ppm of full-scale
range)/°C.
Digital-to-Analog Glitch Impulse
Digital-to-analog glitch impulse is the impulse injected into the
analog output when the input code in the DAC register changes
state. It is normally specified as the area of the glitch in nV-s and
is measured when the digital input code is changed by 1 LSB at
the major carry transition (1FF hex to 200 hex). See Figure 22.
Digital Feedthrough
Digital feedthrough is a measure of the impulse injected into the
analog output of the DAC from the digital inputs of the DAC
but is measured when the DAC output is not updated. It is specified
in nV-s and is measured with a full-scale code change on the
data bus, that is, from all 0s to all 1s and vice versa.
相关PDF资料 |
PDF描述 |
|---|---|
| NBSG11MNG | IC CLOCK BUFFER 1:2 12GHZ 16-QFN |
| MC100LVEP210FAG | IC CLOCK BUFFER 1:5 3GHZ 32-LQFP |
| MC100LVE222FAG | IC CLK BUFF DVDR MUX 2:15 52LQFP |
| XRD5410AIDTR-F | IC DAC 10BIT SRL 8SOIC |
| MC100LVEP14DTR2G | IC CLOCK BUFFER MUX 2:5 20-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5310BRT | 制造商:Analog Devices 功能描述: |
| AD5310BRT-500RL7 | 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 设计资源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 标准包装:10,000 系列:- 设置时间:- 位数:12 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 薄型，TSOT-23-8 供应商设备封装:TSOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:2.7M |
| AD5310BRT-R2 | 功能描述:INTEGRATED CIRCUIT 制造商:analog devices inc. 系列:* 包装:带卷（TR） 零件状态:最後搶購 封装/外壳:SOT-23-6 供应商器件封装:SOT-23-6 标准包装:1 |
| AD5310BRT-REEL | 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
| AD5310BRT-REEL7 | 功能描述:IC DAC 10BIT R-R W/BUFF SOT-23 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 设计资源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 标准包装:10,000 系列:- 设置时间:- 位数:12 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 薄型，TSOT-23-8 供应商设备封装:TSOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:2.7M |
发布紧急采购，3分钟左右您将得到回复。