- 您现在的位置：买卖IC网 > PDF目录10228 > AD7685CRMZRL7 (Analog Devices Inc)IC ADC 16BIT PSEUDO-DIFF 10MSOP PDF资料下载
参数资料
| 型号： | AD7685CRMZRL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT PSEUDO-DIFF 10MSOP |
| 产品培训模块： | Power Line Monitoring Motor Control |
| 设计资源： | Parametric Measurement Unit and Supporting Components for PAD Appls Using AD5522 and AD7685 (CN0104) Integrated Device Power Supply for PAD with Output Voltage Range 0 V to 25 V (CN0130) |
| 标准包装： | 1,000 |
| 系列： | PulSAR® |
| 位数： | 16 |
| 采样率（每秒）： | 250k |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 15mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 1 个伪差分，单极 |
| 配用： | EVAL-AD7685CBZ-ND - BOARD EVAL FOR AD7685 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD7685
Rev. C | Page 24 of 28
APPLICATION HINTS
LAYOUT
The printed circuit board (PCB) that houses the AD7685
should be designed so that the analog and digital sections are
separated and confined to certain areas of the board. The
pinout of the AD7685 with all its analog signals on the left side
and all its digital signals on the right side eases this task.
Avoid running digital lines under the device because these
couple noise onto the die, unless a ground plane under the
AD7685 is used as a shield. Fast switching signals, such as CNV
or clocks, should never run near analog signal paths. Crossover
of digital and analog signals should be avoided
At least one ground plane should be used. It could be common
or split between the digital and analog section. In the latter case,
the planes should be joined underneath the AD7685.
The AD7685 voltage reference input REF has a dynamic input
impedance and should be decoupled with minimal parasitic
inductances. This is done by placing the reference decoupling
ceramic capacitor close to, and ideally right up against, the REF
and GND pins and connected with wide, low impedance traces.
Finally, the power supplies VDD and VIO should be decoupled
with ceramic capacitors, typically 100 nF, placed close to the
AD7685 and connected using short and wide traces to provide
low impedance paths and to reduce the effect of glitches on the
power supply lines.
An example layout following these rules is shown in Figure 46
and Figure 47.
EVALUATING THE PERFORMANCE OF THE AD7685
Other recommended layouts for the AD7690 are outlined in
the documentation of the evaluation board (EVAL-AD7685CB).
The evaluation board package includes a fully assembled and
tested evaluation board, documentation, and software for
controlling the board from a PC via the universal evaluation
control board (EVAL-CONTROL BRD3).
02
96
8-
04
4
Figure 46. Example of Layout of the AD7685 (Top Layer)
0
29
68
-04
5
Figure 47. Example of Layout of the AD7685 (Bottom Layer)
相关PDF资料 |
PDF描述 |
|---|---|
| ADM4852ARZ-REEL7 | IC TXRX RS485/422 2.5MBPS 8SOIC |
| AD7714ARSZ-3REEL | IC ADC 24BIT SIGMA-DELTA 28SSOP |
| SP490CN-L/TR | IC TXRX RS485 FULL DUPLEX 8NSOIC |
| SP1485EMN-L/TR | IC TXRX RS485 DIFF ESD 8SOIC |
| LTC1745IFW#PBF | IC ADC 12BIT 25MSPS LN 48TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7685-C-U2 | 制造商:Analog Devices 功能描述:250 KSPS 16-BIT PULSAR? A/D CONVERTER IN ?SOIC - Bulk |
| AD7685-S-U2 | 制造商:Analog Devices 功能描述:250 KSPS 16-BIT PULSAR? A/D CONVERTER - Bulk |
| AD7685XRM-U3 | 制造商:Analog Devices 功能描述:A/D CONVERTER 250KSPS 16-BIT PULSAR - Bulk |
| AD7686 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-Bit, +/-0.65 LSB INL, 500 kSPS PulSAR Differential ADC in MSOP/QFN |
| AD76861 | 制造商:AD 制造商全称:Analog Devices 功能描述:18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN) |
发布紧急采购，3分钟左右您将得到回复。