- 您现在的位置：买卖IC网 > PDF目录10245 > AD7739BRUZ-REEL7 (Analog Devices Inc)IC ADC 24BIT 8CH SIG-DEL 24TSSOP PDF资料下载
参数资料
| 型号： | AD7739BRUZ-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 7/32页 |
| 文件大小： | 0K |
| 描述： | IC ADC 24BIT 8CH SIG-DEL 24TSSOP |
| 标准包装： | 1,000 |
| 位数： | 24 |
| 采样率（每秒）： | 15.1k |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 100mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 8 个单端，单极；8 个单端，双极；4 个差分，单极；4 个差分，双极 |
| 配用： | EVAL-AD7739EBZ-ND - BOARD EVAL FOR AD7739 |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
Data Sheet
AD7739
Rev. A | Page 15 of 32
I/O PORT REGISTER
8 Bits, Read/Write Register, Address 0x01,
Default Value 0x30 + Digital Input Value × 0x40
The bits in this register are used to configure and access the
REVISION REGISTER
8 Bits, Read-Only Register, Address 0x02,
Default Value 0x09 + Chip Revision × 0x10
This register contains the 4-bit revision code and the 4-bit
generic code for the ADC (see Table 18 and Table 19). This
register can be used to correctly identify the ADC, or as a check
to ensure that serial communication is working correctly.
TEST REGISTER
24 Bits, Read/Write Register, Address 0x03
This register is used for testing the part in the manufacturing
process. The user must not change the default configuration of
this register.
ADC STATUS REGISTER
8 Bits, Read-Only Register, Address 0x04, Default Value 0x00
In conversion modes, the register bits reflect the individual
channel status. When a conversion is complete, the corresponding
channel data register is updated and the corresponding RDY bit
is set to 1. When the channel data register is read, the corre-
sponding bit is reset to 0. The bit is reset to 0 also when no read
operation has taken place and the result of the next conversion
is being updated to the channel data register. Writing to the
mode register resets all the bits to 0.
In calibration modes, all the register bits are reset to 0 while a
calibration is in progress; all the register bits are set to 1 when
the calibration is complete.
The RDY pin output is related to the content of the ADC status
register as defined by the RDYFN bit in the I/O port register.
The RDY0 bit corresponds to Channel 0, the RDY1 bit
corresponds to Channel 1, and so on (see Table 20).
Table 16. I/O Port Register Bits
Bit
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Mnemonic
P0
P1
P0 DIR
P1 DIR
RDYFN
REDPWR
0
Sync
Default
P0 pin
P1 pin
1
0
Table 17. I/O Port Register Bit Descriptions
Bit
Mnemonic
Description
7, 6
P0, P1
When the P0 and P1 pins are configured as outputs, the P0 and P1 bits determine the output level of the pin.
When the P0 and P1 pins are configured as inputs, the P0 and P1 bits reflect the current input level on the pins.
5, 4
P0 DIR, P1 DIR
These bits determine whether the P0 and P1 pins are configured as inputs or outputs. When set to 1, the
corresponding pin is an input; when reset to 0, the corresponding pin is an output.
3
RDYFN
This bit is used to control the function of the RDY pin on the AD7739. When this bit is reset to 0, the RDY pin
goes low when any channel has unread data. When this bit is set to 1, the RDY pin goes low only if all enabled
channels have unread data.
2
REDPWR
Reduced power. If this bit is set to 1, the AD7739 works in the reduced power mode. The maximum MCLK
frequency is limited to 4 MHz in the reduced power mode.
1
0
This bit must be 0 for proper operation.
0
Sync
This bit enables the SYNC pin function. By default, this bit is 0 and SYNC/P1 can be used as a digital I/O pin.
When the sync bit is set to 1, the SYNC pin can be used to synchronize the AD7739 modulator and digital filter
with other devices in the system.
Table 18. Revision Register Bits
Bit
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Mnemonic
Chip revision code
Chip generic code
Default
X
1
0
1
Table 19. Revision Register Bit Descriptions
Bit
Mnemonic
Description
7 to 4
Chip revision code
4-bit factory chip revision code
3 to 0
Chip generic code
On the AD7739, these bits read back as 0x09.
Table 20. ADC Status Register Bits
Bit
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Mnemonic
RDY7
RDY6
RDY5
RDY4
RDY3
RDY2
RDY1
RDY0
Default
0
相关PDF资料 |
PDF描述 |
|---|---|
| AD9223ARSZ-REEL | IC ADC 12BIT 3.0MSPS 28SSOP |
| AD9221ARSZ-REEL | IC ADC 12BIT 1.5MSPS 28SSOP |
| MS3106E22-22P | CONN PLUG 4POS STRAIGHT W/PINS |
| LTC1418IG#TRPBF | IC A/D CONV 14BIT SRL&PAR 28SSOP |
| D38999/20WD5PA | CONN RCPT 5POS WALL MNT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD773A | 制造商:AD 制造商全称:Analog Devices 功能描述:10-Bit, 20 MSPS Monolithic A/D Converter |
| AD773AJD | 制造商:Analog Devices 功能描述:ADC Single Pipelined 20Msps 10-bit Parallel 28-Pin CDIP 制造商:Rochester Electronics LLC 功能描述:IC, 10-BIT 20 MSPS ADC - Bulk |
| AD773AKD | 制造商:AD 制造商全称:Analog Devices 功能描述:10-Bit, 20 MSPS Monolithic A/D Converter |
| AD773ASD/883B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog-to-Digital Converter， 10-Bit |
| AD773-EB | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
发布紧急采购，3分钟左右您将得到回复。